ChrisC4 Posted February 10, 2009 Share Posted February 10, 2009 When there are dual HC 300's in project, does the master controller distribute all the audio? Does the slave controller need to output audio? The system has the C$ 8 channel amp as well as a shinybow switcher. All zones are working fine accept the bedroom audi where there is an addtional Yamaha receiver. Link to comment Share on other sites More sharing options...
RyanE Posted February 10, 2009 Share Posted February 10, 2009 You can use audio endpoints from controllers, regardless of whether they're the master controller or not.That is, if you have 2 300's in a project, you can use both audio outs from the main controller, and both audio outs from the slave controller.You may choose to not use the ones on the main controller to save CPU on the controller running Director, although not using Navigator saves much more CPU.RyanE Link to comment Share on other sites More sharing options...
ChrisC4 Posted February 10, 2009 Author Share Posted February 10, 2009 Thanks Ryan. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.