Jump to content
C4 Forums | Control4

Redfish Server/IPMI Control


Recommended Posts

Posted

Redfish Server/IPMI Control

https://www.drivercentral.io/platforms/control4-drivers/utility/redfish-ipmi-control/

thumbnail.png

Overview
 

Cinegration Developments Redish IPMI Control Driver allows customers that manage servers to obtain the current status of their server as well as perform the powering on and graceful shutdown of their server. This can be especially useful if you have any servers off site or in a separate room that you would like to power down or turn on. The driver features feedback of the current power state of the server. You can easily change the power state of your server via a simple combination of button presses via a Control4 UI Button. One button press will bring up a Confirmation dialog on the UI Button to ensure that you want to perform the action. Following the confirmation dialog, the next button press will complete that action.

 

What is Redfish? Redfish is a much needed update to the IPMI standard that provides a much easier way to interact with our servers/computers, as well as provide us with a much richer set of information than with the previous IPMI standard. We can pull just about any type of data from a server via the Redfish standard.

 

Does your Computer or Server support the Redfish standard? Consult your motherboards documentation or visit the official site for more info (https://redfish.dmtf.org) 

 


Features

     Monitor the power state of your computer or server

     Remotely Power on your hardware

     Remotely Shutdown your hardware

     Restart your computer/server

     Program events based off computer/server state

 

 

 

UI Button
When the servers power state it on, indicated by the green lights on the server icon. A button press, followed by the confirmation button press will execute a graceful shutdown of your server.

 

When the power state is off. A button press, followed by a confirmation button press will perform a power on of your server.

 

Requirements
This driver is compatible with Control4 2.9.1 or higher. 

A strong network connection is required to effectively utilize this driver. 

 

Disclaimer

This driver ONLY works withthe Redfish standard by DMTF (https://redfish.dmtf.org). 


 
 

FAQ

Can you give us some examples of how we could use this driver?

- Remotely power down your server in your basement. 

- Monitor the current state of your server/computer.

- Power down your power hungry servers while on holiday.

- Restart your computer every night at a scheduled time.

- Turn on/off your server when you change the room state.

 

What hardware does this driver support?

The Redfish standard is being adopted by pretty much all major motherboard manufacturers, while it does cater to hardware in server environments, manufacturers such as Asus are bringing it into the consumer environment as well.

 

Does this driver work with all motherboards?

No. your motherboard will typically be labeled with an additional ethernet port called an IPMI or BMC port. Please check your motherboards documentation.

 

Where can I get support if I have an issue?

If you have questions or issues with the driver or integration, please go to https://help.drivercentral.io/ and submit a ticket.

 

Do you offer showroom discounts?
All Cinegration Development drivers support the DriverCentral showroom project.
 
Can I try this driver out before buying it?
All Cinegration Development drivers for Control4 come with a 7-day trial. Simply add the DriverCentral licensing driver along with this driver and you can fully test the driver before purchasing. 

 

 

            
Driver is provided by Cinegration Development LLC.  All rights reserved.


Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.