smartahome Posted July 14, 2009 Share Posted July 14, 2009 hi, are you able to set and unset the intruder alarm from the iphone. The tab is available on the iphone but when you press it it does not do anything. Is it supported yet? It works fine via the interface.Thank youJohn Link to comment Share on other sites More sharing options...
pharmdsmith Posted July 14, 2009 Share Posted July 14, 2009 Are you talking about the web navigator through 4sight or the iphone app? On the web navigator once you select the security tab there is a small tab under the disarm/arm information that says toggle keypad, hit that and the keypad pops out so you can set/unset the alarm. The iphone app works exactly like your tv gui or touch screens in the house.pharmdsmith Link to comment Share on other sites More sharing options...
smartahome Posted July 15, 2009 Author Share Posted July 15, 2009 I am talking about the iphone app, you go to house, click on the security arrow and it does nothing. Any ideas?Thanks Link to comment Share on other sites More sharing options...
pharmdsmith Posted July 15, 2009 Share Posted July 15, 2009 Nope, mine pulls up my keypad and works perfectly. Hopefully someone with more expertise then me(which is most of this forum) will chime in. Link to comment Share on other sites More sharing options...
smartahome Posted July 15, 2009 Author Share Posted July 15, 2009 Thanks pharm.What drivers are you using? I have a DSCxxx connected to a Security Partition driver. (are you an installer or end user..?) Link to comment Share on other sites More sharing options...
thecodeman Posted July 15, 2009 Share Posted July 15, 2009 He has a Vista panel and the ICM. We're his dealer Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.