Jaffacree Posted April 11, 2020 Share Posted April 11, 2020 All, I found this driver online and I am looking to implement into my system using this HDMI Switch. I can add the driver, but after I make all connections including IR, and go to use the driver, nothing happens. I cannot get the IR Signal to be sent from the EA1 at my Living Room in my system to the HDMI Switch. I have an EA3 controlling the system in a different room and the EA3 and EA1 are connected via CAT6. Anyone have any thoughts? MonoPrice AVSwitch Driver is one I found online and the Monoprice HDX-401E is one that I created using the IR codes i found online. Neither sends an IR signal as I visually cannot see the bud emitting a signal and no inputs are changing. I have also attached the text file with the codes as well. Any help would be appreciated. Monoprice HDX-401E IR Codes.txt avswitch_Monoprice_HDX-401E.c4i avswitch_MonoPrice_AVSwitch.c4i Quote Link to comment Share on other sites More sharing options...
Jaffacree Posted April 11, 2020 Author Share Posted April 11, 2020 So for shits and giggles I installed one of my Zigbee to IR modules to the driver. Works flawlessly. So that tells me that I have an issue with my EA1 not emmiting the signal. Has anyone else had issues with a EA1 doing IR? Quote Link to comment Share on other sites More sharing options...
sonic30101 Posted April 11, 2020 Share Posted April 11, 2020 I have seen 1 ea have hardware issues and all IR stopped working. Haven't had an issue with certain ports when bound correctly yet Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.