jimmyzdc Posted December 5, 2009 Share Posted December 5, 2009 Hi guys,I have a HC300 that a friend of mine let me borrow that he is not using anymore. We decided to upgrade the software on it to match my composer version of 1.8. The upgrade seem to work fine but now when I try to do anything I keep getting an error that says "The project is locked. The system is most likely being updated. No modifications can be made." The HC300 is the only thing in the system. I even left the system run overnight just in case it was still updating. Is there some way to reset back to factory settings? When I connect to the system manager I see the following:Desired=Unknown/Install/Remove/Purge/Hold| Status=Not/Installed/Config-files/Unpacked/Failed-config/Half-installed|/ Err?=(none)/Hold/Reinst-required/X=both-problems (Status,Err: uppercase=bad)||/ Name Version Description+++-===============================-===============================-==============================================================================ii ami-addon 1.8.2.56194 AMI Drivers and Configurationsii c4drivers 1.8.2.56194 Control4 Driversii excel-announcements 1.8.2.56194 Announcement Mediasii kernel-modules-wolverine 2.6.28.10-rc8.53 Linux 2.6 Kernel Modulesii kernel-wolverine 2.6.28.10-rc8.53 Linux 2.6 Kernelii preupgrade 1.8.2.56194 preupgrade packageii rootfs-hc300 1.8.2.56194 Root Filesystemii system-version 1.8.2.56194 System Version UtilityOKNAME STATEamgserver enabledaudioclient enabledaudioserver enabledc4lookup disabledc4server enabledcrond enableddirector enableddtserver enablednavigator enablednetusbserver enablednmbd enabledntpd enabledopenvpn enabledprocessserver enabledrhapServer enabledsmbd enabledthttpd enabledupmand enabledzap disabledzserver disabledzserver2 enabledOKname=eth0enabled=1type=dhcpaddress=192.168.1.104netmask=255.255.255.0gateway=192.168.1.1mac=00:0F:FF:06:23:ABup=1OKhostname=home-controller-300-000FFF0623ABdomain=nstype=dhcpnameserver1=192.168.1.1nameserver2=nameserver3=ntpserver=OKDesired=Unknown/Install/Remove/Purge/Hold| Status=Not/Installed/Config-files/Unpacked/Failed-config/Half-installed|/ Err?=(none)/Hold/Reinst-required/X=both-problems (Status,Err: uppercase=bad)||/ Name Version Description+++-===============================-===============================-==============================================================================ii ami-addon 1.8.2.56194 AMI Drivers and Configurationsii c4drivers 1.8.2.56194 Control4 Driversii excel-announcements 1.8.2.56194 Announcement Mediasii kernel-modules-wolverine 2.6.28.10-rc8.53 Linux 2.6 Kernel Modulesii kernel-wolverine 2.6.28.10-rc8.53 Linux 2.6 Kernelii preupgrade 1.8.2.56194 preupgrade packageii rootfs-hc300 1.8.2.56194 Root Filesystemii system-version 1.8.2.56194 System Version UtilityOKThanks,Jaime Link to comment Share on other sites More sharing options...
henniae Posted December 5, 2009 Share Posted December 5, 2009 What version of Composer are you running? Just knowing it is 1.8 is not enough. There is a 1.8.0, a 1.8.1 and a 1.8.2 version of Composer.The OS version you have installed on your controller is 1.8.2.65194 (the most recent version available) so you will need Composer 1.8.2.56194. Most likely your Composer version is not 1.8.2.56194. The problem you have described is symptomatic of a mismatch between Composer and controller software versions. Link to comment Share on other sites More sharing options...
jimmyzdc Posted December 5, 2009 Author Share Posted December 5, 2009 Oh yup you are right. My Composer is 1.8.0 Build 44415 and the update we did on the director was 1.8.2.56194. I think we just assumed that the update manager would push the same version of composer onto the director. Is there some way for my to sync them up?Thanks,Jaime Link to comment Share on other sites More sharing options...
ILoveC4 Posted December 5, 2009 Share Posted December 5, 2009 Download the correct version of Composer. Link to comment Share on other sites More sharing options...
henniae Posted December 5, 2009 Share Posted December 5, 2009 Oh yup you are right. My Composer is 1.8.0 Build 44415 and the update we did on the director was 1.8.2.56194. I think we just assumed that the update manager would push the same version of composer onto the director. Is there some way for my to sync them up?Thanks,JaimeOuch. Is this a pirated copy of Composer? Link to comment Share on other sites More sharing options...
jimmyzdc Posted December 6, 2009 Author Share Posted December 6, 2009 Thanks guys...my friend is going to talk to his other buddy who is a dealer to get the correct Composer for me. Basically I'm just using this as a test to play around with to see if I want to invest the money into Control4....which I'm sure I will be lol.Jaime Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.