For Araknis 310 Router PPPoE Connection: How to set VLAN on WAN1 port and VCI/VPI Values?

[padgabe]

I have Centurylink fiber internet, and I would like to remove my Centurylink gateway and attach my Araknis router (AN-310-RT-4L2W) directly to the Centurylink ONT.  I have my PPPoE login, but for it to work I also need to:

1.  Set Araknis WAN port to VLAN 201.  This is where Centurylink routes internet traffic.

2.  Set Araknis router to specific VCI/VPI settings.

I've spoken to Centurylink and they allow you to use your own hardware.  I am just unable to locate these settings in my router including looking through the manual.  Any input would be appreciated.

[ejmck55]

I'm looking into the same thing, were you able to find a way to do this?

[travisj7]

Unfortunately, I don't think this is a feature of any Araknis router. The new x20 (220 and 520) models lack support for this as well.

[travisj7]

If you are looking for something from SnapAV that supports VLAN IDs on the WAN interface you will need to choose one of the Pakedge routers. The RK-1 and RT-3100 both support this.