dmcvie Posted January 27, 2023 Share Posted January 27, 2023 Just added a Wyrestorm MX606 to my system to finally try and resolve the HDMI switching issues and it just won't respond. I've added the Serial driver and it works just fine. Both tested using the "Test Mode" (double click on the driver to get a matrix up to verify connectivity and function) - The Serial driver works, the Web UI for the switch works, the front panel buttons work, just the IP driver fails. When the Test mode for the Ip driver comes up, there is no indication that anything is being switched, in the C4 UI or the front panel. Unfortunately, I don't have a serial port at the rack that has the Wyrestorm switch, I was hoping to do this on IP. Any suggestions? Both the controller and HDMI switch are on the same network, similar IP addresses and the driver status is "OK" in driver properties. Crazy. Thanks in advance for any insights! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.