kcarlasc1 Posted January 18, 2010 Share Posted January 18, 2010 Ok.. so have a switch(std switch no dimmer) wired to the garage lights. The other night noticed it did not go on with the programming... so tap the top and nothing.. had to hold the top down for a couple of seconds... did a 9-9-9 reset and then it started working fine again or at least I thought. Shortly after the reset starts acting the same way again.Removed it from the project did another triple 9 and re-added it. Again works for just a minute or so and then back to not working. I can turn the light on and off from composer by double clicking on the light using the On and off buttons, of I use the toggle or top button does not work and does not respond to programming on and offs. And should add... when it starts to flake out.. hitting the top button turns off the light if its on.Tried a 5-5-5,9-9-9 and a 15 and no go...This is a 1.8 system...Any thoughts or ideas would be great... probably a bad switch.. but willing to try a few more things Link to comment Share on other sites More sharing options...
kcarlasc1 Posted January 21, 2010 Author Share Posted January 21, 2010 Anyone? Link to comment Share on other sites More sharing options...
CFUG Posted January 21, 2010 Share Posted January 21, 2010 So, you removed it from the project.... I guess you are some sort of "dealer"? Why not just RMA the thing or go install another? Link to comment Share on other sites More sharing options...
kcarlasc1 Posted January 21, 2010 Author Share Posted January 21, 2010 I could... but I like to make sure its nothing in Composer, etc. before I call support... Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.