bertrandG Posted March 19, 2010 Share Posted March 19, 2010 Hello,After see different post for ip camera, I trie to configure my ip camera but i don't arriveFirstly i've modify a panasoci driver:And when i use this driver on composer, the test http connection don't work.If a personn can help methank's Link to comment Share on other sites More sharing options...
neildilgee Posted March 19, 2010 Share Posted March 19, 2010 Bonjour Bertrand. My dealer has got a IP driver which he created and installed on my system but I haven't tested it yet. I'll be away from home for a week. I'll test it and ask him if I could email it to you. If you need me to send you details in french I will do it via email. This is an english site but vive la france. Link to comment Share on other sites More sharing options...
xc420 Posted March 19, 2010 Share Posted March 19, 2010 Hello,After see different post for ip camera, I trie to configure my ip camera but i don't arriveFirstly i've modify a panasoci driver:http://img441.imageshack.us/img441/7064/camo.jpgAnd when i use this driver on composer, the test http connection don't work.http://img229.imageshack.us/img229/6074/composer.jpgIf a personn can help methank'sThis doesn't look right<URL>/http://ipcam/video?profile=3</URL>Do you need to use username and password? Link to comment Share on other sites More sharing options...
RyanE Posted March 19, 2010 Share Posted March 19, 2010 The URL portion should *only* contain the URL, not the hostname, not HTTP://, etc.If you look closer at the Panasonic camera drivers, you should be able to see what I'm talking about.Of course, if it doesn't support MJPEG, it's not going to work all that well in any case.RyanE Link to comment Share on other sites More sharing options...
bertrandG Posted March 22, 2010 Author Share Posted March 22, 2010 Yes when i see the other driver for panasonic... the url don't begin by "http://..." but the official website of my camera give an url which begin by "http://"bertrand Link to comment Share on other sites More sharing options...
RyanE Posted March 22, 2010 Share Posted March 22, 2010 Right. The camera driver builds the URL itself, from the hostname / IP address in the Properties page, along with the port in the properties page, and the rest of the URL from the lines in the .c4i file.That's why there's no need to include the http://ipaddress:port/ portion of the URL in the .c4i file. They get added by the compiled part of the driver.RyanE Link to comment Share on other sites More sharing options...
Question
bertrandG
Hello,
After see different post for ip camera, I trie to configure my ip camera but i don't arrive
Firstly i've modify a panasoci driver:
And when i use this driver on composer, the test http connection don't work.
If a personn can help me
thank's
Link to comment
Share on other sites
5 answers to this question
Recommended Posts
Archived
This topic is now archived and is closed to further replies.