vharral Posted January 29, 2011 Share Posted January 29, 2011 I set up a media scene by adding all (14) rooms of my home that have speakers so my wife could listen to whole house music. Then I removed all of the basement rooms from the media scene as I wanted to experiment with only the main floor. Now the problem is that she started a blu-ray for the grandkids downstairs and it's playing on four rooms. When I issued the room off command on the unused room (on the SR250 for that room) all rooms turned off. It seems as some ghost of this media scene when all rooms were added is doing this. Any hints? Link to comment Share on other sites More sharing options...
ILoveC4 Posted January 29, 2011 Share Posted January 29, 2011 Go into Composer and make sure all media scenes are deactivated. Link to comment Share on other sites More sharing options...
vharral Posted January 29, 2011 Author Share Posted January 29, 2011 Yeah I did that. I only have two media scenes. One for the Doorbell and this one I was testing. Both indicate they are not active when you look at them in composer. I have tried activating and deactivating the scene twice. At any rate the scene does not (any longer) contain any rooms in the basement as I removed them previously. Thanks for the suggestion. Link to comment Share on other sites More sharing options...
ILoveC4 Posted January 29, 2011 Share Posted January 29, 2011 Try rebooting the system. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.