mthomtech Posted October 9, 2011 Share Posted October 9, 2011 This is a first for me, but I was having some random issues that are normally fixed with a project refresh and/or equipment reboot. Today when I did that, my project just isn't communicating at all. No remotes are connecting, no buttons are working, etc.I've tried several different backups, all with some issues. A backup from a few years ago at least gets some communication with the lights, but not much else.I have noticed I am able to turn on some equipment when I open that specific equipments interface through ComposerHE ... but it's hit and miss.thecodeman - Cody - DDI is my dealer, so if you see this, maybe you can help me out before I call on Monday 4Sight is active.Anyone seen issues like this? I'm on basically all 1st Gen equipment. I did notice that it looks like one of my HTC's is not powering up after the reboot also. Link to comment Share on other sites More sharing options...
thecodeman Posted October 9, 2011 Share Posted October 9, 2011 I received your email but am en-route to a trade show.. Your htc that's not working may be the zserver if it's offline and your remotes don't work. I'll try to log in here in a bit and take a look. Link to comment Share on other sites More sharing options...
thecodeman Posted October 9, 2011 Share Posted October 9, 2011 Ok, just remoted in and your controller that was zigbee server was the one that was offline. I made another controller zigbee server for the same channel and looks like everything is back online in your mesh. I also replied to your email. Link to comment Share on other sites More sharing options...
mthomtech Posted October 9, 2011 Author Share Posted October 9, 2011 Thanks Cody! That did the trick. Just had to take batteries out of the remotes to get them to re-initialize, but that's all. I'm glad you saw this so quickly. Remote service paid off!I'll give you guys a call tomorrow and see about a service call.Thanks,Michael Link to comment Share on other sites More sharing options...
JP Rizal Posted September 15, 2012 Share Posted September 15, 2012 Ok, just remoted in and your controller that was zigbee server was the one that was offline. I made another controller zigbee server for the same channel and looks like everything is back online in your mesh. I also replied to your email.Same thing happened to me. It is one thing to switch zservers. Does this mean that controller cannot be used as a Zigbee server ever again. It still is my director so I was hoping to get the zserver and the director in the same controller again. How do i get the zserver on this controller back online? Thanks Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.