TDAWG Posted January 1, 2012 Share Posted January 1, 2012 Does anyone know how to address the remote into Composer? I have pressed the bottom button (4) times as stated in the instruction manuel and NO luck. Would you also be able to assist in address specific buttons to control specific itmes i.e. button 1 open East garage door Link to comment Share on other sites More sharing options...
RyanE Posted January 1, 2012 Share Posted January 1, 2012 First of all, are you sure it matches your current ZigBee setup?They sold both Embernet and ZigBee Pro versions of the device. You need an Embernet version if you're running < a 1.8 Control4 system, and a Pro version if you're >= 1.8.0.Next, if it's a pro system, the device may have been learned into a different system, and if so, you'd have to do the 'leave network' option on the device. Unfortunately, I don't remember what the key sequence is to do that.Lastly, to enroll something into Control4, you have to have the 'Identify' dialog open and up in ComposerPro , before having the device do it's Identify routine (the 4 tap routine, typically).Good luck with your project.RyanE Link to comment Share on other sites More sharing options...
Godzilla Posted January 1, 2012 Share Posted January 1, 2012 also make sure you have batteries in it.........and make sure the switch at the bottom of the remote is to the left (should see lights when pressing buttons) Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.