cannemi

Ha, Spell check, meant to say "anyway for me to send"

My kids lost the Theatre remote is there anyway to send a "beep' to the remote to find it? Thanks

I am almost there!!! Does anyone know how I do the following: By default every potential zone exists in the system with a default setting even when they are not connected to an actual sensor. If the configuration of the panel is not modified to invalidate unused zones they will appear in the Control4 interface. In order to resolve this set each unused zone to type 0 for locations 25, 27, 29, 31, 33, 35, 170, 172, 174, 176, 178, 180, 182, 184, 186, 188, 190, 192, 194, 196, 198, 200, 202, & 204. I am confusing on how to do In order to resolve this set each unused zone to type 0 (is this done from composer? from the keypad? I have ZONE 121, 129,137,145,153,161,169 that are showing up in C4 but I am not using them so it will not let me arm/disarm cause it shows the zone as open

I am getting closer So now I have 7 ZONES, which are showing on devices that are not actually there. I did see this in documentation By default every potential zone exists in the system with a default setting even when they are not connected to an actual sensor. If the configuration of the panel is not modified to invalidate unused zones they will appear in the Control4 interface. In order to resolve this set each unused zone to type 0 for locations 25, 27, 29, 31, 33, 35, 170, 172, 174, 176, 178, 180, 182, 184, 186, 188, 190, 192, 194, 196, 198, 200, 202, & 204. I am not sure how to remove these zones. Also I am not seeing these zones in HE. Thoughts?

@dw886 This is the cable I have StarTech.com 10' RS232 Serial Null Modem Cable - Null Modem Cable - DB-9 (F) to DB-9 (F) - 10 ft - SCNM9FF https://www.amazon.com/dp/B00006B8BJ/ref=cm_sw_r_cp_api_i_GhVLEbBJG48RA

Well that now looks alittle better!

@dw886I just validated those Setting on 0 and on 72 (584e) THank you Then are now set correctly

Thanks @dw886I will take a look at this. I really have no idea what I am looking at but will try to understand

So I have been trying to understand these instructions for a couple of days. Any assistance would be appreciate, Dealer doesn't know this panel too well. Any help would be appreciated, Trying to figure out how to configure this unit. Any suggestions? I am pretty sure I have it configured correctly but I don't know what configs the C4 needs to see my panel. Lights are flashing for data being received but C4 cannot read anything.

If you are interested please PM me for pricing and info. Rack ears and power Cable included OS is 3.1.2 and I recently upgraded to the EA-5 so no longer needed. (SOLD)

K thanks i heard something about if you swap out equipment c4 essentially bricks the unit

I just swapped out a HC-800 for the EA-5. Is it possible for me to sell it? I hate to just throw it out.

Any help would be appreciated, Trying to figure out how to configure this unit. Any suggestions? I am pretty sure I have it configured correctly but I don't know what configs the C4 needs to see my panel. Lights are flashing for data being received but C4 cannot read anything. Using the

My dealer was able to get it in composer pro and then able to set the IP statically. Once I had the IP set statically everything came up and worked fine. Thank you for the suggestions!

Does anyone have a Pakedge system. I am looking at possible using it for Switch/Router/Wireless systems. I am curious, what models do you have and do you like it? Dealers, how easy is it to install and are you happy with it? Thanks

I am running eero as router and juniper as switch, so no Sent from my iPhone using Tapatalk

K thank you I will check it out Sent from my iPhone using Tapatalk

There is no way to set IP on it that I am aware of Sent from my iPhone using Tapatalk

Has anyone ever had issues with this using getting DHCP to work. I plugged this into my network and everything seems to be fine with DHCP on my end, but I cannot get the unit to pull and IP at all. I am thinking there might be something wrong with hardware.

Well my tech called support today and they instructed him the eero is not a supported router. So what is on there support list?

Can someone provide the latest list of supported networking gear. I am looking for access points / routers/Poe switches Thanks Sent from my iPhone using Tapatalk

Thanks everyone for the input

If I make it a custom button it works just fine

Alright, So I have a very basic command called "Garage Doors" Alexa turn on Garage Doors, her response is that command doesn't work on Garage Doors. But if I say Alexa Turn off garage doors is works fine. Any Suggestions. How can it work one way but not the other? I have tried deleting the scenes and redo-ing them but no luck Here is my VERY simple programming

@sweeper154 What a great update thank you. I believe I will have to do the same thing. My installer is set to come in a couple of days or so. Can you send over the instructions on the keypad. Thanks for update!