me23
-
Posts
379 -
Joined
-
Last visited
-
Days Won
1
Content Type
Profiles
Forums
Blogs
Gallery
Downloads
Events
Posts posted by me23
-
-
On 9/25/2021 at 7:10 PM, chopedogg88 said:
I would try disconnecting all of the speakers from the amp and power it up and see what happens.
Ok did this same result. All orange. I noticed that none of the 3 fans on the side are running.
-
Using triad pamp8-100 and was not getting sound out of one of my zones. Looked on the rack and all the zones lit orange/yellow on the front. I power cycled and result the same.
I saw in the manual it means thermal shutdown if i remember correctly, so I unplugged the amp overnight. Next day the same result again. So is this thing dead?
-
Yeah it would be nice to know instead me wasting time making sure it wasn't on my end. Like an email or something giving a heads up.
-
This is happening to me today. Get unable to to connect message. Anyone else?
-
Yep, that worked perfect. Thanks!
-
23 hours ago, bphillips09 said:
@Reece Lawrie@me23@Uh-Wise Try this one - All I did was change the GUIDE command to send 2 pulses instead of 5. Pressing the "Guide" button should now be the same as pressing the XBOX button once on a controller. https://drive.google.com/file/d/1DoWGUMXYB8MzWzV1ytwJYXLRidvETl2o/view?usp=sharing
Ok, Ill try it and report back. Thanks
-
5 hours ago, South Africa C4 user said:
If the sensor is simply failing, what you can do (not ideal but I have this in my programming as a fail safe) is as follows:
1. Add a delay that is more than long enough for the doors to open fully (eg 2 minutes);
2. Repeat the code you have above.
Essentially if the sensor is failing, your door will open when you try to close it and then close a minute or two later.
Thats a good idea. Thanks! Ill try that
-
Correct. Its happened only twice in last couple of weeks and this programming has been in place for years. But I twice is 2 times too many when it leaves your garage wide open over night.
-
Ok, thanks. Thats kinda what I figured. I will just disable that programming for now.
-
I have a simple scheduler event at 10:00
If garage door 1 is open
Close garage door 1
If garage door 2 is open
Close garage door 2
Twice now in the last few weeks, at 10:00 garage door 2 opens. I found this out waking up in the morning to see the door has been open all night and video camera confirms at 10:00 it opened.
Any ideas? Contact sensor going bad? Is there a log I can pull to see what the director is doing at that time?
Thanks
Mike
-
I was hoping this driver would work with the Xbox one but it doesnt. Even using the b button doesnt get you out of apps like Disney +.
Thanks anyway.
-
25 minutes ago, Nick Wanerka said:
I hate to say this but control4 stopped selling the red need.
It was a limited release so I thought. That's why I'm asking people on here if anyone will sell it.
-
Thought i would try in this section. Anyone selling one of the limited red neeo remote? It would really match some of my red decor in my theater room.
Thanks
Mike
-
On 6/26/2021 at 12:45 PM, eddy.trochez said:
I have a red one. Open box, never installed.
You still have this?
-
Did you see this on their front page?
NOTE: If you are using version 110 or 180 of our driver and your triggers have recently stopped working - this is due to a firmware update that Amazon is rolling out to older Echo Dot (Gen 2) devices. You will need to install our V200 driver, which can be found HERE. v200 REQUIRES OS3. You will also have to remove the old driver from the project and then add the new driver, so please be sure to copy over any trigger programming that you want to retain into Macros, or backup your project file, and then you can copy/paste the programming from the backup using Virtual Director.
Not sure if this would help or not. I'm still on OS 2.10.3 Guess I need to upgrade.
-
Any update on this? I can add triggers but Alexa will not discover them.
-
Ok thanks guys. Guess I'm not use to my fans having 4 speeds. That's what ill do though, off, then 1-4 speeds
-
Was going to get a couple of fan controller switches and get engravings done on them for off, low, med, high. But since there are 5 buttons don't know what else I would put on it. Just curious if any of you guys have them engraved and what they are labeled as.
Thanks
Mike
-
Well I have an ea5, but I just don’t feel like upgrading. I’m happy with my system right now, and I don’t have time troubleshooting a new OS anytime soon.
-
So let me get this straight. If you have generation 2 echos, not only do you need the v2 driver you also have to upgrade to OS3. Really? I have 2.10.6, you can’t make it work with that? I really don’t want OS3.
-
Yeah, the epic driver uses other commands such as start, run, arm, etc. for the on command. So it must have been an amazon change.
I totally forgot about routines. Thanks, it works doing it that way!
-
Been working fine for awhile. Noticed the other day my "house lockdown" trigger, which locks the doors and arms the security system, is no longer responding to a "start" command.
It will work with "turn on" but when you say "start house lockdown", alexa says house lockdown isn't responding. I deleted it and re added but same issue. Anyone else experience this?
version 110 driver, OS 2.10.6
-
What generation touchscreenpanel is it? I have this issue as well. I have a mix of some 2nd and 3rd generation touchscreens. The T2s have this issue not the T3s in my setup. Don’t know if it’s because the T2s use flash and the newer ones dont.
-
16 hours ago, Drake0508 said:
Still having issues with my ios devices. How long has yours been working?
Flawlessly since one of the last c4 app updates. Been maybe couple of weeks or so. Up until then if I pulled it up on my iPhone the camera grid would show but if I selected a camera it would just sit there with the loading circle.
Middle Atlantic rack and shelfs, also Startech
in For Sale
Posted
I have 2 used middle antlantic slim 5 series that are in good shape. One comes with a 20 outlet strip mounted. Also have several used rack shelfs, 2u and 3u and maybe a 4u--got to check on that.
Also have a used rack drawer to store stuff in as well.
Rack with outlet ill sell for $275 and other rack $250. The 2u rack drawer for $100 and the shelves for $50 each. Will discount for multiple items.
I also have a brand new Startech adjustable depth Wall Mount for $125 and new startech cable rings for $5 each and a cable oranizer for $25.
PM if interested. Im outside of Raleigh, NC so obviously prefer local pickup or drive within reason. I could ship the startech stuff if interested.
20220423_174052092_iOS.heic 20220423_174104079_iOS.heic 20220423_193029922_iOS.heic 20220423_194504672_iOS.heic 20220423_194523392_iOS.heic