twmoonly
-
Posts
866 -
Joined
-
Last visited
-
Days Won
3
Content Type
Profiles
Forums
Blogs
Gallery
Downloads
Events
Posts posted by twmoonly
-
-
Nothing is out of the running
-
6 minutes ago, LollerAgent said:
Many have recommended LTS for both NVR integration and cameras. Have you looked at them?
I have. Thanks.
-
what nvr are you using and model cameras?
-
Hikvision or Amcrest?
-
How can i make RCA audio connections with new driver as there is only hdmi?
-
Use cloud key or a remote server and push them all back to it.
-
How do you guys rack mount the Amcrest NVR's?
-
Thanks, That was the spec I am looking for.
-
Can a lighting panel be located in an unconditioned attic that does not have icynene insulation on the ceiling?
-
18 minutes ago, BraydonH said:
In my opinion right now AVProEdge (formerly AVProConnect) has the best gear possible. It is true 4K, with upscalers and downscalers and audio extraction. Its as good as it gets for HDBaseT
What is the price point for their equipment? 4x4, 8x8?
-
-
I figured it out. I had to login through chrome. Thanks
-
-
camera wont let me select basic, its currently on digest
-
On 3/23/2018 at 1:56 PM, TheWizard said:
I just pushed out an update to the driver that includes the missing documentation. It covers how to program against the events.
https://annex4.link/drivers/hikvision-camera?changelog=latestI am following your instructions but my camera doesn't allow me to select digest/basic, I can only select one or the other. It appears on my devices but it is not populating any device information in composer system design.
-
5 minutes ago, twmoonly said:
Can I pull the stream off of the NVR if connected directly to it?
Never mind, from what you said on the website it will work either way.
-
Can I pull the stream off of the NVR if connected directly to it?
-
How do you program automation via HTTP stream? Do you have any documentation?
-
From my research it might be possible to connect a wire to the alarm output and trigger that output based on motion but need to test this
-
I have a DS-2CD2142FWD-I and was wondering if I could trigger events off of the motion detection? And if so how do I program this?
-
I do like this idea but if you're in the driveway washing the car/boat/motorcycle the door could close if you're nowhere near the motion sensor. I'm sure there's way to program around this. Maybe include a condition to exclude the motion sensor from closing the doors if music is playing in the garage (if it's an audio zone).
Yeah you could program off of music or time of day to only close automatically after sunset.
Sent from my iPhone using Tapatalk -
The motion could also be used to automatically close doers after a period of time if no motion is detected.
As far as controlling it you will need a wire to the myq keypad on the wall and a wire to a garage door sensor to track if it’s open or closed. You will need to solder the wire onto the keypad on the wall then connect it to a relay on controller or card access piece. As far as the door sensor that can run back to a contact on the controller or contact on card access piece.
Sent from my iPhone using Tapatalk -
Yes, and Yes to you previous two post.
-
What device are you using to connect the computer to the panel?
Cameras
in General Control4 Discussion
Posted
DS-2CD2142FWD-I - I have this camera now and mine works with the app