Mono
-
Posts
9 -
Joined
-
Last visited
Content Type
Profiles
Forums
Blogs
Gallery
Downloads
Events
Posts posted by Mono
-
-
Thanks
By reboot, do you mean power it down and back up again?
-
My hc250 shows up in my router, so I assume its online.
My switches look like this, I think they are wired.
I can't imagine any cable being disturbed as the panels and hc250 are in a control room.
-
I can't take a picture as I'm not at home right now.
I can still turn on lights using the buttons on the dimmer units in the panel.
We only use control4 for lighting, we inherited it with the house.
My hc250 has 2 or 3 blue lights on the front panel and as I mentioned the lighting worked up until yesterday.
-
My system is an old control4_hc250.
I came home yesterday to find none of my switch panels would control any lighting, nor would the app control any lighting.
Any ideas of a simple fix?
-
I just wanted to take the time to say how good Kyle and Andrzej from Coolabode have been fixing a fault on my system remotely.
It wasn't an easy fix, but you know sometimes some people are prepared to put in that extra effort that makes all the difference and that's what these guys did.
I'm glad I found someone I can rely on in the future.
Thanks again
-
-
No they didn't.
Is that an issue?
-
Hello
I have just moved into a new home with a control 4 system.
The system has 5 keypads each with 6 buttons on them. I believe from research that these are ZigBee pro.
The lighting in the home does not work, the keypads seemed to have white leds showing apart from 2 on each keypad that were blue.
The previous owner has taken their router with them.
There are two 8 channel dimmers.
There is 1 Bus Ethernet gateway.
There is 1 C4-HC250-BL-1 controller.
I just want the lighting working from the keypads.
So far I have
Installed a new router
Assigned the IP of the controller to 192.168.1.254 in the router
I did do a network reset on the controller but I did not do a factory reset.
On the keypads I pressed the top button 9 times bottom 4 and top 9 each keypad turned off and back on again with all leds lit blue.
The controller has the power and link lights lit
The dimmers led are flashing orange/green.
We can control all the circuits by using the buttons on the dimmer units but not from the keypads.
I am waiting for a pro to get back to me but in the meantime what would you recommend I do next?
Thanks in advance
Lighting control stopped suddenly
in Control4 Hardware
Posted
Thanks everyone for your help I do appreciate it, I'll give that a go this weekend.