avtexan

I figured it out. In UniFi you either need to turn off Multicast & Broadcast Control or add the gateway as an exception. Thanks for the assist!

Thanks!!! I had it setup that way on the UniFi network but not on the C4 controller. While we are at it any ideas how to get Spotify Connect to broadcast the Spotify Connect Name? The ShareBridge is broadcasting fine but not the Spotify Connect C4 Driver

The audio services SiriusXM, Tidal & Pandora all work fine but then stop after almost exactly 20 minutes. I have a UniFi for my network gear. Any Ideas for a fix?

In the driver setup the UI Associations is set to chime the C4 touchscreens and it works great. Any way to toggle this off/on through programing when a Party mode is activated/deactivated? I can turn off the HAI panels beeps (Beeper enabled / disabled) but not the C4 Panels

This is what I have. Plus a antenna and remote.

I have some RQ bridges and just sent you an email

Core-5 & 3.3.2.651066-res. I only have once instance of the Spotify driver running Now the other drivers Pandora, Tidal & Sirius will stop after a song and not go to the next one I have a Unifi set up. I changed the DNS to 8.8.8.8 / 8.8.4.4 as I saw someone suggested. Any other ideas?

So keep them in mind if y’all need it for a future project. I think it looks and works great!!! I am using the Lutron Homework’s Illumination (P5) driver. All of the switched and dimming lighting loads are working fine and I can emulate HW keypad presses without issue My 2 issues are: 1) Can the driver be upgraded to get the LED state of the Homeworks keypads? It looks like you can assign it but not sure if you can get the current state of the LED. 2) Can the driver be upgraded to have a separate driver for fans. There is a separate fan drivers in the Lutron RR2 driver and it is better visually (Picture of a Fan) and has a 25%, 50%, 75% & 100% function

Well 4drivers looked at my request and has already updated the Magic Custom Buttons driver. I now have buttons that mimic the Lutron keypads for lighting and shades scenes. I have a variable setup that has the LED’s on the Magic Custom Buttons track the room status. It works great if I press the Lutron keypad or the Custom Button. I will also use these for some global scenes and mode settings as well. Give them a try if you need something similar in a project.

Anybody else having issues with C4 not showing in Spotify Connect? I can get Spotify to C4 with ShairBridge but not Spotify Connect. Tried to remove and then re-add all music services and also power cycled the main controller. I am using a unique Spotify Connect Name in the Driver Properties All other music services are working fine & all devices are on the same network Ideas?

I tried the Chowmain driver but they do not show up on the iPads or iPhones. I have the magic switch buttons working. On magic switch button select it simulates the Lutron keypad button press & release and the switch simulates the LED. I have programing looking for the Lutron scene to change and it updates the magic button switch. I do wish the magic switch button would select when pressed anywhere on the button like the toggle version does, not just the text area. Also if I could left justify the text it would look more like Lutron keypads. Ideally they would have a third button type available that has a status light instead of a switch. I sent them a note for feedback. Any other ideas?

I am wanting to use the motion sensors to show an event that can trigger an action of turning on lights with a timer. It may be late but I am having a hard time finding how to see the event of say Foyer Motion tripped in Programing In Lua I see the zone going OPEN/NOT READY them OPENED Thoughts?

Yes all of the lighting and shades are in C4 and are individually working fine. I already have all of the scenes for the individual rooms and for global scenes built into Lutron and they can be accessed by the Lutron keypads. I am trying to project the keypads onto the C4 navigators so the scenes are easily accessed in a familiar and attractive way. I don't think I should replicate the scenes in C4 because: 1) The popcorn effect of as an example having over 100 lights and shades go on with an Entertain Scene 2) Lutron is already tracking if any light is on in a scene group and will light the LED in that case. It toggles from there so if a LED is on the next buttons press turns off the scene or if the LED is off the next button press turns on the scene.

So the true feedback for me is important so I will try the Advanced Custom Button driver I am using the Homework’s Illumination (P5) driver. All of the switched and dimming lighting loads are working fine and I can emulate HW keypad presses with C4 custom button pushes. My 2 issues are: 1) How do I get the current LED state of the Homeworks keypads? It looks like you can set it but not sure if you can get the current state of the LED in this driver. I have a mix of homework and Ra2 lighting. I need to know the status of the HW keypad Led to properly program the selection of the correct phantom button in Ra2 2) Is there a fan driver? The switch driver works but not as functional as the fan driver for Ra2 (25%, 50%, etc). Can I use the dimmer driver for a fan?

I am using the Homework’s Illumination (P5) driver. All of the switched and dimming lighting loads are working fine and I can emulate HW keypad presses with C4 custom button pushes. My 2 issues are: 1) How do I get the LED state of the Homeworks keypads? It looks like you can assign it but not sure if you can get the current state of the LED. I have a mix of homework and Ra2 lighting. I need to know the status of the HW keypad Led to properly program the selection of the correct phantom button in Ra2 2) Is there a fan driver? The switch driver works but not as functional as the fan driver for Ra2