Cor

Yes, the TV is connected properly. When the TV is off and I remove the driver and connect it again via SSDP, the TV will turn on with the "on" command, the first time. When turned off, the TV will not go on again (only when I remove and reinstall the driver again). The power is on. Seems like a weird bug. The LUA is also receiving the GET_POWER_STATE = on, when the TV is turned off. Seems like a software bug somehwere.

Got a weird problem with a TV in a setup. The first time it connects through SSDP it will turn on without a problem, if it was off when connected. After it's turned of, the TV will never turn on through the WOL (yes, tried every possible thing with WOL and Turn on with Wifi / Bluetooth, SMPLINK is off). This seems like there's no network problem (it turns on the first time), the controls are all fine and really quick. It's on both the wired and wireless network. Tried both networks alone, without result to get the TV to on. It a LG OLED 55" C8 PLA. Any suggestions?

Hi all, Since the update from the Shelly driver yesterday, the switches / plugs lets Control4 EA3 crash completely. The same plug, in another EA3 controller (added later, but same IP to test), works fine. Also, I see the plug going on/off on the crashing EA3 if I turn it on through Composer on the non-problem EA3. As soon as I do an input in the problem-EA3, that EA3 crashes completely. On the working EA3, it keeps working and I can use the plug as usually. It looks like there's something wrong with the input. The factory image is loaded (so the "factory reset"is done), the problem persists. Any ideas?