groomden Posted February 22, 2012 Share Posted February 22, 2012 just noticed that when i press the C4 button on my remote, nothing happens. any ideas not requiring a service call? i can still turn the av system on, turn lights on and off, and stuff like that, just no C4 interface to be found. Link to comment Share on other sites More sharing options...
msgreenf Posted February 22, 2012 Share Posted February 22, 2012 the c4 button should bring up the home controller connected to that tv. dealer has to fix that if not. Link to comment Share on other sites More sharing options...
Letran Posted February 22, 2012 Share Posted February 22, 2012 just noticed that when i press the C4 button on my remote, nothing happens. any ideas not requiring a service call? i can still turn the av system on, turn lights on and off, and stuff like that, just no C4 interface to be found.Have you checked if the TV is on the right input?Assuming that it USED to work before and that the bindings are already established then I would confirm that the RCA did not come loose on the controller or from the TV. If not your dealer can check remotely if the navigator service is still enabled. Link to comment Share on other sites More sharing options...
groomden Posted February 22, 2012 Author Share Posted February 22, 2012 i think its a pc cable connection? it used to work, just dawned on me that i haven't seen it in days and wouldn't you know it, gone;-) Link to comment Share on other sites More sharing options...
totaltheaterexperience Posted February 22, 2012 Share Posted February 22, 2012 You need to make sure you have an on-screen device selected for the room too Link to comment Share on other sites More sharing options...
seth_j Posted February 22, 2012 Share Posted February 22, 2012 reboot your controller. If you're on one of the earlier 2.0 builds this is common. Its since been fixed. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.