Snopro11 Posted June 2, 2012 Share Posted June 2, 2012 Did a simple DVr receiver swap and in the process ended up unplugging some components. I have a Hc300 x 2 and an hc 1000. Remotes seem to have gone wonky now. Work as they should for about 30 seconds then lose all connectivity. Can reboot system and same cycle repeats. Same in each zone and four different remotes. Have rebooted everything a million times to no avail. Room 2 thinks it's room 1's remote and will keep initializing to such yet does not work in that room after a few seconds. Limited info I know but any thoughts? As I sit typing this I see every once in a while my wall mount touchpad disconnects and then initializes on its own. It also has the same functionality as the remotes of a few seconds after initialization and then is froze for all intents and purposes. Thanks in advance guys. TVless Link to comment Share on other sites More sharing options...
Snopro11 Posted June 11, 2012 Author Share Posted June 11, 2012 I have tracked this down to director disconnecting within a few seconds. Does it through local home composer or remote dial in. Any thoughts? Link to comment Share on other sites More sharing options...
thecodeman Posted June 11, 2012 Share Posted June 11, 2012 Sounds like your 1000 needs a usb restore and a fresh reload of your project. What did your dealer think? Link to comment Share on other sites More sharing options...
nikon Posted June 11, 2012 Share Posted June 11, 2012 I have tracked this down to director disconnecting within a few seconds. Does it through local home composer or remote dial in. Any thoughts?You may want to try deleting the media database file on the controller running director and rebooting. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.