getafix Posted November 20, 2012 Share Posted November 20, 2012 SO I bought myself a little hdmi matrix (4x2)It works well but the control is via IR.Each input has a descrete code but there are no output codes.ANy idea how I would create the driver so that I could connect Output A to my receiver and Output B to to another tv in another room?Thanks Link to comment Share on other sites More sharing options...
Cyknight Posted November 20, 2012 Share Posted November 20, 2012 I'm guessing it has 8 buttons on the remote, 4 are for one output, 4 are for the other?You would just learn the appropriate codes in (call them a1, a2 etc) and assign those codes. Link to comment Share on other sites More sharing options...
getafix Posted November 21, 2012 Author Share Posted November 21, 2012 I'm guessing it has 8 buttons on the remote, 4 are for one output, 4 are for the other?You would just learn the appropriate codes in (call them a1, a2 etc) and assign those codes.Thanks for the reply.I started doing that and learned all the codes. Just when doing the bindings in connections, I don't have the two outputs (A & to assign to my amp and other tv.Can I have two inputs assigned to one device (bluray player) output?Got it sorted. Thanks Link to comment Share on other sites More sharing options...
Cyknight Posted November 21, 2012 Share Posted November 21, 2012 For others facing the same issue, I'm assuming you only added one output instead of two? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.