Monopoly Posted February 1, 2013 Share Posted February 1, 2013 I am using this Sony receiver for one of my bedrooms with an HC-300C. The problem is the default volume is in db% and doesn't jive with the 0-100% the controller, iPad, tv display. So the problem is I don't have any feedback reference to what level I'm at. I poked around in the on screen GUI for the Sony and didn't see any options to change settings; like my Integra. Has anyone ran into this? Link to comment Share on other sites More sharing options...
msgreenf Posted February 2, 2013 Share Posted February 2, 2013 it have a 2 way driver ?? If it doesn't you don't get volume feedback Link to comment Share on other sites More sharing options...
Monopoly Posted February 2, 2013 Author Share Posted February 2, 2013 Good question. It's the stock C4 serial driver for the receiver. Being a crossover cable I would think so --not using the IR emitter. But don't no for sure... Link to comment Share on other sites More sharing options...
dogdvr Posted February 3, 2013 Share Posted February 3, 2013 Control4 will always show 0-100, your receiver will always show db.SorryBrent Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.