piwko98 Posted April 19, 2014 Share Posted April 19, 2014 Newb here working on installing a 3-way LSZ-101 switch. Making little progress but can't quite figure it out. Here is what I have Light Fixture, Wall Box1, Wall Box2. I believe Wall Box1 is the where the power is running to as no matter what position either switches are on, Black always stays on 120v. Wall Box1Black 120v (hot) - Black on switchRed (when On running 120v, when Off 0) - Not sure where to connect this one (red or white or both)Ground - Green on switchBlack (when On running 70v, when Off 120v) - Not sure where to connect this one (red or white or both) Wall Box2Standard switch installed and working Not sure how to wire the C4 LSZ-101 Switch with the Red & White to make it work properly. Any advice? Link to comment Share on other sites More sharing options...
mstafford388 Posted April 20, 2014 Share Posted April 20, 2014 Do you have a 2 button or some other keypad for the other end of the 3 way? if you just install one control4 switch the regular switch that is currently on the other end of the 3 way would become dead. Link to comment Share on other sites More sharing options...
ILoveC4 Posted April 20, 2014 Share Posted April 20, 2014 Hire an electrical contractor. Sent from my Droid MAXX via Tapatalk. Link to comment Share on other sites More sharing options...
piwko98 Posted April 20, 2014 Author Share Posted April 20, 2014 Thanks guys. Good info to know. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.