Jump to content
C4 Forums | Control4

Control4 hardware versions


chriscannes

Recommended Posts

Wondered if someone could explain the difference in the different versions of the hc500 & hc200 available there seems to be more then 1 .

Likewise with the sr250 and sr150 there seem to be a version 1 & 2.

Will this hardware be able to work with an hc800 on 2.2?

Thanks

Sent from my iPhone using Tapatalk

Link to comment
Share on other sites


There is only one 500, but there are 2 versions for the 200 and 300. The second version og these have a slightly better processor (about 30% overall performance increase), and have a built in factory restore vs using a USB restore.

 

V2 of the SR250 has a built in light sensor for auto - dimming it's display, I rarely use the SR-150, so I'm not sure but I don't remember seeing a v2? - if so it'll be the same change I assume.

 

All of these work fine on 2.2 and on.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.