fredArchitexAudio Posted May 14, 2015 Share Posted May 14, 2015 Ok so to explain the setup a little I have two hc-250 on the same system, Sometime when the system start the music automaticly (via programming) we see the tune in radio appear on the screen but no sound is comming out and I have to mute then unmute to have sound. The volume is controlled by the hc-250 output. I have the same probleme with the two output (the two hc-250) they is no other system audio they are connected directly to the speaker on one of the zone. On the other one its was connected to a speaker point and now is connected to the 8 zone control 4 amp but the problems is the same. P.S: sorry if I use engrish Thank you! Link to comment Share on other sites More sharing options...
fredArchitexAudio Posted May 20, 2015 Author Share Posted May 20, 2015 I guess nobody have the same problems... Link to comment Share on other sites More sharing options...
Matt Lowe Posted May 20, 2015 Share Posted May 20, 2015 lots of things that could be happening. if you start the music manually by selecting it from a navigator do you have an issue? Link to comment Share on other sites More sharing options...
fredArchitexAudio Posted May 20, 2015 Author Share Posted May 20, 2015 lots of things that could be happening. if you start the music manually by selecting it from a navigator do you have an issue? Never had the problem when starting manually. Only happen when I'm starting it with the programmation. It dosn't happen all the time but a lot more since the last update. I'm running 2.7.1. The controller show the radio station and the song playing but no sound, when i mute the icon change for the muted then I unmute and bam sound again... Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.