Daryl M Posted July 20, 2008 Share Posted July 20, 2008 I have 2 dimmers that are not working. They are blinking top and bottom. I cannot turn on lights at all, any ideas.ThanksDaryl Link to comment Share on other sites More sharing options...
henniae Posted July 20, 2008 Share Posted July 20, 2008 Try to power cycle them. Flip the breaker. Link to comment Share on other sites More sharing options...
Brad_The_Lucky Posted July 20, 2008 Share Posted July 20, 2008 Did you try to reset them? (Click top 9 times, then bottom 9 times, then top 9 times) Link to comment Share on other sites More sharing options...
neil12011 Posted July 21, 2008 Share Posted July 21, 2008 if you got them from ebay, then they're dead...Are they id'd in your project? If they wont control the load then they're probably bad...just my experience.Neil Link to comment Share on other sites More sharing options...
Daryl M Posted July 22, 2008 Author Share Posted July 22, 2008 Tried the 9/9/9 did not workFinally called installerDimmers blown, due to power outage and surgeThanks for the replies Link to comment Share on other sites More sharing options...
slemay Posted July 23, 2008 Share Posted July 23, 2008 If you purchased them through a dealer, and they are under 2 years old - it's under warranty, get them replaced. If you purchased them through eBay or used - they are not covered under warranty and you'll simple have to go replace them with new units. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.