Nwills Posted February 22, 2016 Share Posted February 22, 2016 One of my hybrid keypads has the top button connected to the load which is that room's pot lights. The thing is I've replaced them all with Philips Hue and don't want to cut power to them. Instead I use the EV driver for brightness which turns them off when at 0...this simulates the same behaviour as the Philips Hue app. Is there a way to have the top (load) button disconnected from the load and assign an advanced lighting scene to that button instead? Link to comment Share on other sites More sharing options...
South Africa C4 user Posted February 22, 2016 Share Posted February 22, 2016 Yes, but you will need a dealer to make the connection in Pro Link to comment Share on other sites More sharing options...
Nwills Posted February 22, 2016 Author Share Posted February 22, 2016 1 minute ago, South Africa C4 user said: Yes, but you will need a dealer to make the connection in Pro Can't be done in HE? Good to know. I'll ask. Thanks. Link to comment Share on other sites More sharing options...
South Africa C4 user Posted February 22, 2016 Share Posted February 22, 2016 4 minutes ago, Nwills said: Can't be done in HE? Good to know. I'll ask. Thanks. If it is following the load, you can change that in HE and then program a button click to activate the Advanced Lighting Scene. However, the better (more reliable and faster response) way to do it is to bind the device to the Advanced Lighting Scene. This needs pro. if it is currently bound rather than following the load (I don't think this is the case from what you say) then you would need Pro anyway to get rid of the current binding. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.