punkrock Posted November 21, 2008 Share Posted November 21, 2008 hey just ditched my comcast (which was not ver comcastic btw...) for dish and realized that there is no "-" on the remote or in the c4 driver. im using an anttena for OTR HD locals and not being able to macro in a fav channel like 5-1 really stinks.anybody know if the "-" (dash) exisists? I check remote central and couldnt seem to locate the hex.thanks... Link to comment Share on other sites More sharing options...
Schrader Posted November 21, 2008 Share Posted November 21, 2008 I am also interested.I need to use the dash with Directv to directly access the HD NFL channels on Sundays. Link to comment Share on other sites More sharing options...
henniae Posted November 21, 2008 Share Posted November 21, 2008 The dash command should be part of the driver for the HR-xxx box. I usually program the #or * button to emit the dash if the Sat box is the currently selected device for the room. Link to comment Share on other sites More sharing options...
slemay Posted November 21, 2008 Share Posted November 21, 2008 DirecTV is the * key. When you press * on a DirecTV remote, it gives you the DASH. Link to comment Share on other sites More sharing options...
R_Willis Posted November 30, 2012 Share Posted November 30, 2012 I know this is an old post, but...I'm using a directv receiver (H20 v100) and it has the old OTA capability where it merges with the directv channels. Thus being in the Cincinnati market for directv, but being able to pull in Dayton channels OTA. There is a code for dash/hyphen in the driver I'm using (H20 / ir) and it works if you click on "satellite" in your project tree and bring up the virtual remote in composer and type it in, but won't work on SR150/250s (tried each button to the right/left of the "0"). Any ideas or insight?Thanks! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.