BPFUNK Posted October 22, 2017 Share Posted October 22, 2017 I have a 6 camera setup using a Luma 500 DVR (analog). I have been struggling to get events/motion back to C4. I have it setup in the DVR web interface, and i can see the events on the DVR itself, but cannot get it to speak to C4 (all connections from DVR to motion drivers are there). Is it something with the Event Port setter on DVR driver? Mine was set to default (7000), but unclear what to do with that. Thanks for the help! Link to comment Share on other sites More sharing options...
deano Posted October 29, 2018 Share Posted October 29, 2018 Hi did you manage to resolve this? We have the same issue but the port number changes whenever the DVR loses power Link to comment Share on other sites More sharing options...
Matt Lowe Posted October 29, 2018 Share Posted October 29, 2018 have your worked with snapav tech support. i think they made the drivers so they should be able to help figure it out likely just a simple configuration issue. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.