G.Lu Posted June 2, 2019 Share Posted June 2, 2019 I have DS2 with no keypad (not the mini). It stopped working and need some help in debugging. If I take the faceplate off, I can see the RJ45, reset button, and leds. If I unplug and replug it in, the red led turns on, then a few seconds later the left led (sort of amber/greenish) starts to flash, and a few seconds later, the red seems to be flashing in a pattern. The device does not appear on the network and the switch says shows bytes being sent to it but 0 received. Does anybody have any information on how to debug the issue or suggestions to try? Link to comment Share on other sites More sharing options...
G.Lu Posted June 5, 2019 Author Share Posted June 5, 2019 Does anybody have a manual that has any info on led codes? Like perhaps this document (that I cannot access)? https://www.control4.com/docs/product/ds2-door-station-flush-mount/dealer-installation-guide/english/latest Link to comment Share on other sites More sharing options...
Cyknight Posted June 5, 2019 Share Posted June 5, 2019 There's nothing behind that link at all, and I know of no docs by C4 giving an LED overview for the DS2 - however you may be able to find something on the 2N website (they manufacture the device) Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.