blub Posted May 29, 2009 Share Posted May 29, 2009 Hi,does anyone know if Control4 already has an offcial way to integrate EIB / KNX bus system or if there are any future plans.Thakny for your help :-)greetz Link to comment Share on other sites More sharing options...
RyanE Posted May 29, 2009 Share Posted May 29, 2009 No plans that I know of.RyanE Link to comment Share on other sites More sharing options...
tjawi Posted June 2, 2009 Share Posted June 2, 2009 Hi There,Any further update on this? I also need to integrate to EIB / Instabus.If there's no official way/driver, is there anybody that has any other driver that can communicate to EIB?Please let me know,Tjawi Link to comment Share on other sites More sharing options...
blub Posted June 2, 2009 Author Share Posted June 2, 2009 At the moment there is now way to integrate KNX EIB into C4.I have googled a lot with no result. But when control4 is plannig to sell more systems in europe there just is no way for them to ignore that option.greetz Link to comment Share on other sites More sharing options...
RyanE Posted June 2, 2009 Share Posted June 2, 2009 Dealers can write two-way DriverWorks drivers, and/or have someone write one for them.It may be unlikely that Control4 itself will create a driver for KNX, but that doesn't mean that there won't be one at some point. Maybe Control4 UK will undertake to write the driver.RyanE Link to comment Share on other sites More sharing options...
tjawi Posted July 4, 2009 Share Posted July 4, 2009 RyanE, thank you for your info.Blub, please read my messages on the newer forum (regarding this matter)https://forums.control4.com/tm.aspx?m=112687Hopefully this will help.Btw, are you located in Europe? Link to comment Share on other sites More sharing options...
blub Posted July 4, 2009 Author Share Posted July 4, 2009 Yes I am located in Europe.Can you PM me the info, I have no acces on the other forum because I am not a dealer.thx Link to comment Share on other sites More sharing options...
blub Posted March 15, 2010 Author Share Posted March 15, 2010 OkFor everyone who is interested there will eb a EIB / KNX / Instabus integration for Control4 within the next 8-12 weeks - however it is unknown whether it will be one-/two way control or if it will be limited to certain manufactureres for EIB/KNX "system".Pricing of C4 gear however is a real b**** in Europe, for the price of the HW you can even get Cresttron HW...ouch.... Link to comment Share on other sites More sharing options...
bertrandG Posted April 1, 2010 Share Posted April 1, 2010 hello,I want to know if the driver control4/knx arrive...thanks Link to comment Share on other sites More sharing options...
ILoveC4 Posted April 1, 2010 Share Posted April 1, 2010 hello,I want to know if the driver control4/knx arrive...thanksWell...he said 8-12 weeks and it has been 2... Link to comment Share on other sites More sharing options...
bertrandG Posted April 1, 2010 Share Posted April 1, 2010 Okk scuze i hadn't see the old message....I'm staying thanks Link to comment Share on other sites More sharing options...
blub Posted May 30, 2010 Author Share Posted May 30, 2010 HiIt seems that a KNX/EIB solution is finally available, even though it supports only basic functins at the moment.This info I found on a website from a different company - maybe there are two companys working on a solution, I dont know.http://www.genesis-technologies.ch/en/news.html Link to comment Share on other sites More sharing options...
bertrandG Posted June 1, 2010 Share Posted June 1, 2010 2300€ i think it's expensive.... Link to comment Share on other sites More sharing options...
blub Posted June 1, 2010 Author Share Posted June 1, 2010 Yeah kinda expensive - but honestly all C4 gear, H1000 MTs etc. are all freaking expensive in Europe, almost as expensive as Crestron gear. Link to comment Share on other sites More sharing options...
abaumgaertner Posted September 5, 2010 Share Posted September 5, 2010 We have a software based solution - take a look at http://www.tisco.atsupported 2way communication via- RS232 FT1.2- KNXnet/IP- KNXnet/IP RoutingWatch our Demo Video ... Link to comment Share on other sites More sharing options...
bertrandG Posted September 21, 2010 Share Posted September 21, 2010 I have done some test on the driver C4/KNX create by Tisco.Actually we can pilot :- Switch actuator KNX- Dimmer KNX- Dali/KNX gateway- Keypad KNX- Motion sensor KNX- Brightness sensor KNX- KNX thermostat- Knx blind actor...I’ve tested on Hager KNX product. Actually, the connexion between the C4 & the KNX is doing by an gateway RS232. But next week a new version arrive for the KNX/IP gateway.The price of the driver is around 250€ for professional If you want more information contact Gregor at: http://www.tisco.at/en/ Link to comment Share on other sites More sharing options...
gprokesch Posted October 4, 2010 Share Posted October 4, 2010 Hi there,as Andreas and Bertrand already posted we offer a driver solution for the integration of KNX in Control4.Recently we released Version 2.0 of our Driver Suite.With our driver it is possible to establish communication either via RS-232 (FT1.2 protocol), KNXnet/IP or KNXnet/IP Routing.Using standards makes it possible to avoid the need of expensive additional devices like computers or anything. You just need one of the following gateways:* KNX RS-232 Interface (able to handle FT1.2)* KNX IP Interface (KNXnet/IP)* KNX IP Router (KNXnet/IP Routing)Once the communication is established you can control:* Switch Actors* Dim Actors* DALI Gateways* Brightness Sensors* Motion Sensors* KNX Buttons* KNX Thermostats* Heating Actors* Blind Actors* The number of supported devices will increase continously.If you are interested please don't hesitate to contact me at http://www.tisco.at/en/Kind regards,Gregor Link to comment Share on other sites More sharing options...
SerJ_G Posted January 17, 2011 Share Posted January 17, 2011 Hello, Gregor.Are you going to make driver Version 2.1? Link to comment Share on other sites More sharing options...
gprokesch Posted January 24, 2011 Share Posted January 24, 2011 Hi SerJ_G,yes we are! Version 2.1 will be available very soon. I'll keep you posted.CheersGregor Link to comment Share on other sites More sharing options...
gprokesch Posted January 30, 2011 Share Posted January 30, 2011 Hi there,Version 2.1 of the tisco KNX Driver Suite is already available.This version brings:- Much more comfort at the licensing and configuration process.- Ability for controlling relay actors.- Updated functionality of the Thermostat driver making it possible to control heating and cooling.- Improved execution of Control4 Lightscenes.- Compatibility with Control4 firmware version 1.8.2.- Improved communication making it possible for correctly receiving of lighting states when using central light functions on the KNX bus.If you are interested visit us at www.tisco.atCheersGregor Link to comment Share on other sites More sharing options...
DejanBg Posted January 7, 2013 Share Posted January 7, 2013 We have Zigbee switch compatible with Control4 for EU standard 220-240Vwww.smartsolutionserbia.com/en/Product updateSW-DIM-M1 new version The popular SW-DIM-M1 wall panel is available in a new version from 2013. Thanks to its bigger buttons using the device is made even more user-friendly.Our standard warranty is 5 years all faulty devices during warranty we will replace with new one.Our business partner Aling offers many customization housing options. Variety of color masks, flanges and installation boxes easily fits your interior designHope after you receive our information, please feedback your opinion to see which model best suits your needs.We will be happy to answer any questions you may have and explain the unique features and benefits of our products.Welcome to get sample from us to see the Product, Quality, Reliability and Service etc Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.