BuffaloC4 Posted May 28, 2020 Share Posted May 28, 2020 Occasionally I go to play pandora or some other native service on my EA-3 analog output -> to matrix amp and I get no sound. every single time the problem has been that the output switches to 0 volume. (not on navigators, but in the properties of my EA-3). happens once a week. I even tried making a custom button to just circumvent the problem, but I don't believe the programming is exposed. Side note: the controller also occasionally requires a reboot to get IO board working. Maybe 4 times a year. unit was part of the first shipment of EAs so likely no warranty. All thoughts and considerations are appreciated, JM Quote Link to comment Share on other sites More sharing options...
WholeHomeControl Posted May 28, 2020 Share Posted May 28, 2020 I’ve seen this issue as well and don’t have a fix. As a workaround, however, this might help: Set the EA-3 audio output as the audio end point for a hidden room. Now, you have a way programmatically to get that volume level back up to 100% (ie custom button first plays EA3 source in room and then set volume to 100%. Then turn off room.) Quote Link to comment Share on other sites More sharing options...
BuffaloC4 Posted May 28, 2020 Author Share Posted May 28, 2020 3 hours ago, WholeHomeControl said: I’ve seen this issue as well and don’t have a fix. As a workaround, however, this might help: Set the EA-3 audio output as the audio end point for a hidden room. Now, you have a way programmatically to get that volume level back up to 100% (ie custom button first plays EA3 source in room and then set volume to 100%. Then turn off room.) I tried to replicate such binding in my personal system. Didn't expose the set volume value. Anyone else experiencing this? Enough support to hear from c4 maybe? Quote Link to comment Share on other sites More sharing options...
WholeHomeControl Posted May 28, 2020 Share Posted May 28, 2020 4 hours ago, BuffaloC4 said: I tried to replicate such binding in my personal system. Didn't expose the set volume value. Sorry, to be clear, once you have the binding set, you simply set the CURRENT_VOLUME room variable for the hidden room. You might want to trigger this code the moment the volume drops: And, the final piece would be to set the volume on project boot: It's not too pretty, but I think it will solve the problem. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.