wingzz Posted July 31, 2009 Share Posted July 31, 2009 I have the OPPO-83 and wanted to know if anyone has written a driver so we dont have to start from scratch??second question, I have a light in our bathroom that at night I'd like it to come up to say 40% on the first tap and then either inc. 10% each tap after or just go to say 75% then 100%Either way is acceptable with the wife I just cant seem to be able to get the second part, I can get it to come on to 40% but I cant figure out how to make it go to 75% then 100% on 2nd and third tapsThanks for any help Link to comment Share on other sites More sharing options...
wingzz Posted August 2, 2009 Author Share Posted August 2, 2009 bump Link to comment Share on other sites More sharing options...
thecodeman Posted August 2, 2009 Share Posted August 2, 2009 There's an oppo DV981HD driver in the database, but it's the only one I see.The BR player is still relatively new, so I'm not surprised there isn't a driver. Some of the basic IR codes will likely carry over, however there will probably be Blu-ray specific buttons that your dealer will have to learn.When you have it set to 40%, if you hold the top button after the initial tap, does it not ramp to 100%? Link to comment Share on other sites More sharing options...
CFUG Posted August 2, 2009 Share Posted August 2, 2009 I do what Cody suggested. My Master Bath light is set to 20% on a single tap. You walk-in, tap the top, do your thing in minimal light. If I'm shaving that early AM, I just lean on the top button and it hits the maximum set point of 80%. Link to comment Share on other sites More sharing options...
ATLLC Posted August 2, 2009 Share Posted August 2, 2009 If you really want to get to specific increments – this seems to workSet up a numeric variable – brightnessWhen top button is pushed:If hours are between x & y If var brightness = 75 Set level to 75 Stop If var brightness = 40 Set level to 40 Var brightness = 75 StopSet level = 100When bottom button is pushed Turn off light Set var brightness to 40 Link to comment Share on other sites More sharing options...
wingzz Posted August 2, 2009 Author Share Posted August 2, 2009 There's an oppo DV981HD driver in the database, but it's the only one I see.The BR player is still relatively new, so I'm not surprised there isn't a driver. Some of the basic IR codes will likely carry over, however there will probably be Blu-ray specific buttons that your dealer will have to learn.When you have it set to 40%, if you hold the top button after the initial tap, does it not ramp to 100%?no because I use set to level on top button pushed and cant figure the increment part out, is there a better or easier way to do this Link to comment Share on other sites More sharing options...
Rsmolo Posted August 2, 2009 Share Posted August 2, 2009 1.Set up Number variable, name it .... bathroom light2. in programming go to that dimmer, when top button is pushed (action) variables>bathroom light=bathroom light+13. now down to variables, select bathroom light variable,'when variable ..... changes, (action) set small delay, 1or 2 seconds(just so the system can actually have time to count presses) if variable=1, set dimmer to 40% (command) set to value=0 if variable =2, set dimmer to 60% set to value=0 if variable =2, set dimmer to 90% set to value=0 Link to comment Share on other sites More sharing options...
wingzz Posted August 3, 2009 Author Share Posted August 3, 2009 Thanks for the advice, I used rsmolo's method and it works great, wifes happy so now I'm happy:P Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.