Oregun Posted September 8, 2009 Share Posted September 8, 2009 Version 1.7.3.20I have one of my wired Mini-Touch panels that is stuck on the calibration screen. I touch the first cross hairs (lower left), it displays then on the lower right, but then is unresponsive to touch or anything from that point on.I can unplug and reboot and repeat the process, but it always gets stuck at the second touch.Any ideas on how to resolve, troubleshoot, or exit calibration mode?Thanks in advance, dealer is MIA. Link to comment Share on other sites More sharing options...
RyanE Posted September 8, 2009 Share Posted September 8, 2009 First of all, I'd ensure that the faceplate is not on too tight, that can cause issues during calibration, and/or keep it from booting properly.Is this a new screen, was it working previously?RyanE Link to comment Share on other sites More sharing options...
Oregun Posted September 9, 2009 Author Share Posted September 9, 2009 Faceplate was removed (saw the related posts). It's one of the early v1 color mini-touches - I was an early adopter. Didn't seem to like the firmware upgrade. Link to comment Share on other sites More sharing options...
Matt Posted September 9, 2009 Share Posted September 9, 2009 Do you see the mini touch on the network by chance? When you originally boot it up does it show an ip address? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.