weepee Posted October 21, 2009 Share Posted October 21, 2009 I have a 250 remote. two days a go i replaced the batteries and the remote is still working all the TV's, light, etc. But the time is not syncing with the system. I've tried to remove the batteries and replace again, also tried to wait 24 hours. I'm looking for any ideas that i could pull off. Link to comment Share on other sites More sharing options...
ruckus Posted October 21, 2009 Share Posted October 21, 2009 I thought pressing the 4 button four times is what re initializes the remote. Maybe that will help Link to comment Share on other sites More sharing options...
weepee Posted October 21, 2009 Author Share Posted October 21, 2009 Just tried the 4 button 4 times and it did not re initializes the remote. Link to comment Share on other sites More sharing options...
ILoveC4 Posted October 22, 2009 Share Posted October 22, 2009 Pressing the red "4" button four times is how you identify the device during initial installation...it has nothing to do with "syncing" the device. Link to comment Share on other sites More sharing options...
CFUG Posted October 22, 2009 Share Posted October 22, 2009 The most I've had to wait is about 10 mins. but whose counting... Link to comment Share on other sites More sharing options...
weepee Posted October 22, 2009 Author Share Posted October 22, 2009 after pulling the batteries a fourth time and waiting over night it finally came back to full sync. thanks for your ideas Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.