jmk709 Posted February 22, 2010 Share Posted February 22, 2010 Is there a way to change the output volume on a Netgear EVA9150? I got it up and running yesterday and there is quite a bit of volume difference between the TV and the EVA9150. I know that it is not an input issue on the C4 amp because I changed inputs and it was the same. Link to comment Share on other sites More sharing options...
panamagixxer Posted February 22, 2010 Share Posted February 22, 2010 Could be misreading the post, but I just increased the volume on the 9150. I had to switch between TV and the 9150 to make sure the volumes levels were the same, took a couple times, but now when I switch between TV and 9150 they are the same level. Link to comment Share on other sites More sharing options...
jmk709 Posted February 22, 2010 Author Share Posted February 22, 2010 I did not know the 9150 has an independent volume control. I have all of my audio in the celing going through a C4 amp and get blasted out of the room when going back to the TV of changer. I will have to go directly to the 9150 to see about changing the volume. I will try it out tonight.Thanks! Link to comment Share on other sites More sharing options...
ILoveC4 Posted February 22, 2010 Share Posted February 22, 2010 Yeah, you can go into the Netgear and adjust the volume. I had to adjust mine as well as it was too soft. Link to comment Share on other sites More sharing options...
panamagixxer Posted February 23, 2010 Share Posted February 23, 2010 Yep, too soft here, once adjusted, no problem. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.