Jump to content

Component video w/audio (digital or analog) over single Cat5e baluns

Featured Replies

Posted

Can anyone recommend something? I have a SnapA/V unit now, but it is having sporatic problems and I would like to get something new. The run is under 200 feet.

Thanks.

  • Author

I did not check on warranty as they are about 18 months old and assumed they would be out of warranty.

Problem is that red component feed has a bad connection in receivers cat5 input. Red goes away and then when you unplug and then replug in the cat5 cable red works again. Any thoughts? (I already replaced the cat5 cable to eliminate that as the potential problem)

I did not check on warranty as they are about 18 months old and assumed they would be out of warranty.

Problem is that red component feed has a bad connection in receivers cat5 input. Red goes away and then when you unplug and then replug in the cat5 cable red works again. Any thoughts? (I already replaced the cat5 cable to eliminate that as the potential problem)

Humm I had same problem. BUT /smile I found out I had the blue and green mixed up. ( color blind) .

You sure you have the connections right? double check?

Thought the post was about video distribution in the form of a matrix.... It`s early A.M here now. I should probably sleep !!

Smart E do some great point to point stuff too. No idea if it`s available in the U.S

Thought the post was about video distribution in the form of a matrix.... It`s early A.M here now. I should probably sleep !!

Smart E do some great point to point stuff too. No idea if it`s available in the U.S

Yes sleep is beneficial

Archived

This topic is now archived and is closed to further replies.

Important Information

By using this site, you agree to our Terms of Use.