Remote SR-250 dis[lay Network Joined

ngthcongvnit · July 24, 2011

Hi all,

When I ID SR-250 on HC-300 , the LCD Display Network Joined. When i open logging :

Jul 25 11:08:15 home-controller-300-000FFF11EDE5 ZAP: Current trust center policy decision id is: EZSP_ALLOW_JOINS_REJOINS_HAVE_LINK_KEY

Jul 25 11:08:15 home-controller-300-000FFF11EDE5 ZAP: Not changing trust center policy

Jul 25 11:08:17 home-controller-300-000FFF11EDE5 ZSVR: Inadequate information for Node 0x000fff0000412513 to be marked online

Jul 25 11:08:17 home-controller-300-000FFF11EDE5 ZSVR: Incoming message inserted new znode for LID: 0x000fff0000412513 SID: 0xfc04

Jul 25 11:08:17 home-controller-300-000FFF11EDE5 ZSVR: Inadequate information for Node 0x000fff0000412513 to be marked online

Jul 25 11:08:17 home-controller-300-000FFF11EDE5 ZSVR: Znode: 0x000fff0000412513 needs to announce since we dont have its identify information.

Jul 25 11:08:17 home-controller-300-000FFF11EDE5 ZSVR: Inadequate information for Node 0x000fff0000412513 to be marked online

Jul 25 11:08:17 home-controller-300-000FFF11EDE5 ZAP: -----------------------------------------------

Jul 25 11:08:17 home-controller-300-000FFF11EDE5 ZAP: Address Table Front Panel Entries

Jul 25 11:08:17 home-controller-300-000FFF11EDE5 ZAP: FP IDX: 0x0000 LID: 0xffffffffffffffff SID: 0xffff

Jul 25 11:08:17 home-controller-300-000FFF11EDE5 ZAP: FP IDX: 0x0001 LID: 0x000fff0000412513 SID: 0xfc04

Jul 25 11:08:17 home-controller-300-000FFF11EDE5 ZAP: FP IDX: 0x0002 LID: 0xffffffffffffffff SID: 0xffff

Jul 25 11:08:17 home-controller-300-000FFF11EDE5 ZAP: FP IDX: 0x0003 LID: 0xffffffffffffffff SID: 0xffff

Jul 25 11:08:17 home-controller-300-000FFF11EDE5 ZAP: FP IDX: 0x0004 LID: 0xffffffffffffffff SID: 0xffff

Jul 25 11:08:17 home-controller-300-000FFF11EDE5 ZAP: FP IDX: 0x0005 LID: 0xffffffffffffffff SID: 0xffff

Jul 25 11:08:17 home-controller-300-000FFF11EDE5 ZAP: FP IDX: 0x0006 LID: 0xffffffffffffffff SID: 0xffff

Jul 25 11:08:17 home-controller-300-000FFF11EDE5 ZAP: FP IDX: 0x0007 LID: 0xffffffffffffffff SID: 0xffff

Jul 25 11:08:17 home-controller-300-000FFF11EDE5 ZAP: -----------------------------------------------

Jul 25 11:08:17 home-controller-300-000FFF11EDE5 ZSVR: Inadequate information for Node 0x000fff0000412513 to be marked online

Jul 25 11:08:21 home-controller-300-000FFF11EDE5 [1736]: Sending data to UI on driver Update Manager(100116) - data = <updateagent><status>device_status</status><deviceid>6</deviceid><version>1.8.2.66691</version><online>1</online><total>0</total><updated>0</updated><devicestate></devicestate><valueinfo></valueinfo></updateagent>

Jul 25 11:08:23 home-controller-300-000FFF11EDE5 ZSVR: Znode: 0x000fff0000412513 needs to announce since we dont have its identify information.

Jul 25 11:08:23 home-controller-300-000FFF11EDE5 ZSVR: Inadequate information for Node 0x000fff0000412513 to be marked online

Jul 25 11:08:28 home-controller-300-000FFF11EDE5 ZSVR: Inadequate information for Node 0x000fff0000412513 to be marked online

Jul 25 11:08:29 home-controller-300-000FFF11EDE5 ZSVR: Znode: 0x000fff0000412513 needs to announce since we dont have its identify information.

Jul 25 11:08:29 home-controller-300-000FFF11EDE5 ZSVR: Inadequate information for Node 0x000fff0000412513 to be marked online

Jul 25 11:08:32 home-controller-300-000FFF11EDE5 [1736]: Pulse

Jul 25 11:08:35 home-controller-300-000FFF11EDE5 ZSVR: Znode: 0x000fff0000412513 needs to announce since we dont have its identify information.

Jul 25 11:08:35 home-controller-300-000FFF11EDE5 ZSVR: Inadequate information for Node 0x000fff0000412513 to be marked online

Jul 25 11:08:41 home-controller-300-000FFF11EDE5 ZSVR: Znode: 0x000fff0000412513 needs to announce since we dont have its identify information.

Jul 25 11:08:41 home-controller-300-000FFF11EDE5 ZSVR: Inadequate information for Node 0x000fff0000412513 to be marked online

Jul 25 11:08:47 home-controller-300-000FFF11EDE5 ZSVR: Znode: 0x000fff0000412513 needs to announce since we dont have its identify information.

Jul 25 11:08:47 home-controller-300-000FFF11EDE5 ZSVR: Inadequate information for Node 0x000fff0000412513 to be marked online

Jul 25 11:08:52 home-controller-300-000FFF11EDE5 [1736]: Pulse

Jul 25 11:08:53 home-controller-300-000FFF11EDE5 ZSVR: Znode: 0x000fff0000412513 needs to announce since we dont have its identify information.

Jul 25 11:08:53 home-controller-300-000FFF11EDE5 ZSVR: Inadequate information for Node 0x000fff0000412513 to be marked online

Jul 25 11:08:59 home-controller-300-000FFF11EDE5 ZSVR: Znode: 0x000fff0000412513 needs to announce since we dont have its identify information.

Jul 25 11:08:59 home-controller-300-000FFF11EDE5 ZSVR: Inadequate information for Node 0x000fff0000412513 to be marked online

Jul 25 11:09:05 home-controller-300-000FFF11EDE5 ZSVR: Znode: 0x000fff0000412513 needs to announce since we dont have its identify information.

Jul 25 11:09:05 home-controller-300-000FFF11EDE5 ZSVR: Inadequate information for Node 0x000fff0000412513 to be marked online

Jul 25 11:09:07 home-controller-300-000FFF11EDE5 ZSVR: Inadequate information for Node 0x000fff0000412513 to be marked online

Jul 25 11:09:11 home-controller-300-000FFF11EDE5 ZSVR: Znode: 0x000fff0000412513 needs to announce since we dont have its identify information.

Jul 25 11:09:12 home-controller-300-000FFF11EDE5 [1736]: Pulse

Jul 25 11:09:15 home-controller-300-000FFF11EDE5 ZAP: Trust Center has a node joining with LID: 0x000fff0000412513 SID: 0x08de Status: EMBER_STANDARD_SECURITY_UNSECURED_JOIN Join Decision: EMBER_SEND_KEY_IN_THE_CLEAR

Jul 25 11:09:15 home-controller-300-000FFF11EDE5 ZAP: Current trust center policy decision id is: EZSP_ALLOW_JOINS_REJOINS_HAVE_LINK_KEY

Jul 25 11:09:15 home-controller-300-000FFF11EDE5 ZAP: Not changing trust center policy

Jul 25 11:09:17 home-controller-300-000FFF11EDE5 ZSVR: Correcting mis-matched sid. Was: 0xfc04 Now: 0x08de LID: 0x000fff0000412513

Jul 25 11:09:17 home-controller-300-000FFF11EDE5 ZSVR: Inadequate information for Node 0x000fff0000412513 to be marked online

Jul 25 11:09:17 home-controller-300-000FFF11EDE5 ZSVR: Znode: 0x000fff0000412513 needs to announce since we dont have its identify information.

Jul 25 11:09:17 home-controller-300-000FFF11EDE5 ZAP: Corrected sid mismatch for LID: 0x000fff0000412513 from SID: 0xfc04 to SID: 0x08de

Jul 25 11:09:17 home-controller-300-000FFF11EDE5 ZSVR: Inadequate information for Node 0x000fff0000412513 to be marked online

Jul 25 11:09:20 home-controller-300-000FFF11EDE5 last message repeated 3 times

Jul 25 11:09:21 home-controller-300-000FFF11EDE5 [1736]: Sending data to UI on driver Update Manager(100116) - data = <updateagent><status>device_status</status><deviceid>6</deviceid><version>1.8.2.66691</version><online>1</online><total>0</total><updated>0</updated><devicestate></devicestate><valueinfo></valueinfo></updateagent>

Jul 25 11:09:23 home-controller-300-000FFF11EDE5 ZSVR: Znode: 0x000fff0000412513 needs to announce since we dont have its identify information.

Jul 25 11:09:23 home-controller-300-000FFF11EDE5 ZSVR: Inadequate information for Node 0x000fff0000412513 to be marked online

Jul 25 11:09:29 home-controller-300-000FFF11EDE5 ZSVR: Znode: 0x000fff0000412513 needs to announce since we dont have its identify information.

Jul 25 11:09:29 home-controller-300-000FFF11EDE5 ZSVR: Inadequate information for Node 0x000fff0000412513 to be marked online

Jul 25 11:09:32 home-controller-300-000FFF11EDE5 [1736]: Pulse

Jul 25 11:09:35 home-controller-300-000FFF11EDE5 ZSVR: Znode: 0x000fff0000412513 needs to announce since we dont have its identify information.

Jul 25 11:09:35 home-controller-300-000FFF11EDE5 ZSVR: Inadequate information for Node 0x000fff0000412513 to be marked online

Jul 25 11:09:41 home-controller-300-000FFF11EDE5 ZSVR: Znode: 0x000fff0000412513 needs to announce since we dont have its identify information.

Jul 25 11:09:41 home-controller-300-000FFF11EDE5 ZSVR: Inadequate information for Node 0x000fff0000412513 to be marked online

Jul 25 11:09:47 home-controller-300-000FFF11EDE5 ZSVR: Znode: 0x000fff0000412513 needs to announce since we dont have its identify information.

Jul 25 11:09:47 home-controller-300-000FFF11EDE5 ZSVR: Inadequate information for Node 0x000fff0000412513 to be marked online

Jul 25 11:09:52 home-controller-300-000FFF11EDE5 [1736]: Pulse

Jul 25 11:09:53 home-controller-300-000FFF11EDE5 ZSVR: Znode: 0x000fff0000412513 needs to announce since we dont have its identify information.

Jul 25 11:09:53 home-controller-300-000FFF11EDE5 ZSVR: Inadequate information for Node 0x000fff0000412513 to be marked online

Jul 25 11:09:53 home-controller-300-000FFF11EDE5 [1736]: Flash: GetConfigFile: using config file /etc/c4firmware/.flash.modconfig

Jul 25 11:09:53 home-controller-300-000FFF11EDE5 [1736]: Flash: GetConfigFile: using config file /control4/firmware/.flash.config

Jul 25 11:09:53 home-controller-300-000FFF11EDE5 [1736]: Flash: ReadConfigFile: Read 35 lines.

Jul 25 11:09:59 home-controller-300-000FFF11EDE5 ZSVR: Znode: 0x000fff0000412513 needs to announce since we dont have its identify information.

Jul 25 11:09:59 home-controller-300-000FFF11EDE5 ZSVR: Inadequate information for Node 0x000fff0000412513 to be marked online

Jul 25 11:10:05 home-controller-300-000FFF11EDE5 ZSVR: Znode: 0x000fff0000412513 needs to announce since we dont have its identify information.

Jul 25 11:10:05 home-controller-300-000FFF11EDE5 ZSVR: Inadequate information for Node 0x000fff0000412513 to be marked online

Jul 25 11:10:11 home-controller-300-000FFF11EDE5 ZSVR: Znode: 0x000fff0000412513 needs to announce since we dont have its identify information.

Jul 25 11:10:11 home-controller-300-000FFF11EDE5 ZSVR: Inadequate information for Node 0x000fff0000412513 to be marked online

Jul 25 11:10:12 home-controller-300-000FFF11EDE5 [1736]: Pulse

Jul 25 11:10:17 home-controller-300-000FFF11EDE5 ZSVR: Znode: 0x000fff0000412513 needs to announce since we dont have its identify information.

Jul 25 11:10:17 home-controller-300-000FFF11EDE5 ZSVR: Inadequate information for Node 0x000fff0000412513 to be marked online

Jul 25 11:10:21 home-controller-300-000FFF11EDE5 [1736]: Sending data to UI on driver Update Manager(100116) - data = <updateagent><status>device_status</status><deviceid>6</deviceid><version>1.8.2.66691</version><online>1</online><total>0</total><updated>0</updated><devicestate></devicestate><valueinfo></valueinfo></updateagent>

Jul 25 11:10:23 home-controller-300-000FFF11EDE5 ZSVR: Znode: 0x000fff0000412513 needs to announce since we dont have its identify information.

Jul 25 11:10:23 home-controller-300-000FFF11EDE5 ZSVR: Inadequate information for Node 0x000fff0000412513 to be marked online

Jul 25 11:10:29 home-controller-300-000FFF11EDE5 ZSVR: Znode: 0x000fff0000412513 needs to announce since we dont have its identify information.

Jul 25 11:10:29 home-controller-300-000FFF11EDE5 ZSVR: Inadequate information for Node 0x000fff0000412513 to be marked online

Jul 25 11:10:32 home-controller-300-000FFF11EDE5 [1736]: Pulse

Jul 25 11:10:35 home-controller-300-000FFF11EDE5 ZSVR: Znode: 0x000fff0000412513 needs to announce since we dont have its identify information.

Jul 25 11:10:35 home-controller-300-000FFF11EDE5 ZSVR: Inadequate information for Node 0x000fff0000412513 to be marked online

Jul 25 11:10:41 home-controller-300-000FFF11EDE5 ZSVR: Znode: 0x000fff0000412513 needs to announce since we dont have its identify information.

Jul 25 11:10:41 home-controller-300-000FFF11EDE5 ZSVR: Inadequate information for Node 0x000fff0000412513 to be marked online

Jul 25 11:10:47 home-controller-300-000FFF11EDE5 ZSVR: Znode: 0x000fff0000412513 needs to announce since we dont have its identify information.

Jul 25 11:10:47 home-controller-300-000FFF11EDE5 ZSVR: Inadequate information for Node 0x000fff0000412513 to be marked online

Jul 25 11:10:52 home-controller-300-000FFF11EDE5 [1736]: Pulse

Jul 25 11:10:53 home-controller-300-000FFF11EDE5 ZSVR: Znode: 0x000fff0000412513 needs to announce since we dont have its identify information.

Jul 25 11:10:53 home-controller-300-000FFF11EDE5 ZSVR: Inadequate information for Node 0x000fff0000412513 to be marked online

Jul 25 11:10:54 home-controller-300-000FFF11EDE5 ZSVR: Sending Normal MTORR from zap with LID: 0x000fff00001c3f16

Jul 25 11:10:54 home-controller-300-000FFF11EDE5 ZAP: MTORR sent with status: EMBER_SUCCESS

Jul 25 11:10:59 home-controller-300-000FFF11EDE5 ZSVR: Znode: 0x000fff0000412513 needs to announce since we dont have its identify information.

Jul 25 11:10:59 home-controller-300-000FFF11EDE5 ZAP: Incoming route for node: 0x000fff0000412513 of: neighbor

Jul 25 11:10:59 home-controller-300-000FFF11EDE5 ZSVR: Inadequate information for Node 0x000fff0000412513 to be marked online

Jul 25 11:11:05 home-controller-300-000FFF11EDE5 ZSVR: Znode: 0x000fff0000412513 needs to announce since we dont have its identify information.

Jul 25 11:11:05 home-controller-300-000FFF11EDE5 ZSVR: Inadequate information for Node 0x000fff0000412513 to be marked online

Jul 25 11:11:11 home-controller-300-000FFF11EDE5 ZSVR: Znode: 0x000fff0000412513 needs to announce since we dont have its identify information.

Jul 25 11:11:11 home-controller-300-000FFF11EDE5 ZSVR: Inadequate information for Node 0x000fff0000412513 to be marked online

Jul 25 11:11:12 home-controller-300-000FFF11EDE5 [1736]: Pulse

please help me to resolve the problem

thanks

ngthcongvnit · July 24, 2011

please help me

thanks

ichbinbose · July 24, 2011

uhmmm, what is it your trying to do? i

ngthcongvnit · July 24, 2011

please help me resolve that problem ? thanks all

ILoveC4 · July 24, 2011

I haven't seen where you explained what the problem is? Is the remote not working properly? If so, what problems is it having?

ngthcongvnit · July 25, 2011

i cannot identify SR-250 . it displays Scanning and Network Joined !!!! cannot loading Room Project ,

cannot ID when i press 4 x4 time

thecodeman · July 25, 2011

i cannot identify SR-250 . it displays Scanning and Network Joined !!!! cannot loading Room Project ,
cannot ID when i press 4 x4 time

Time for a call to tech support.

ngthcongvnit · July 25, 2011

I try remove battery , hold the 4 and zero button the same time . Replace baterry , keep hold button 4 and zero 15s ,When the 4 buttion color light up and dim . I release button 4 and zero. After 10 mins , it still scanning and Network joined ! i cannot identify

ngthcongvnit · July 25, 2011

pic display error SR-250 cannot ID

thanks

ILoveC4 · July 25, 2011

Try pressing room off, #, *, 1, 3, 4, 1, 3, #.

After that, try identifying it.

This is of course only if what thecodeman suggested isn't available.

ngthcongvnit · July 25, 2011

Hi ILOVEC4 , i Tried pressing room off, #, *, 1, 3, 4, 1, 3, #.

After that, try identifying it. but it still cannot id , the LCD of SR-250 display Network Joined !!!!

ILoveC4 · July 25, 2011

Hi ILOVEC4 , i Tried pressing room off, #, *, 1, 3, 4, 1, 3, #.
After that, try identifying it. but it still cannot id , the LCD of SR-250 display Network Joined !!!!

Have you tried rebooting your controller? Have you tried shutting down zigbee server and restarting it?

When you pressed that button sequence did it say "leaving network"?

ichbinbose · July 25, 2011

what OS is the controller on vs the sr250. did you buy it new or off of ebay?

ngthcongvnit · July 26, 2011

i use HC-300 . composer 1.8.2

ILoveC4 · July 26, 2011

i use HC-300 . composer 1.8.2

It well be easier for people to help you if you answer all their questions.

ngthcongvnit · July 27, 2011

i use HC-300 . composer 1.8.2 , SR250-Z-B

thecodeman · July 27, 2011

Do you know what version your HC300 is using and the remote? (the HC300 can be on a different version than the version of software you are using).

ngthcongvnit · July 27, 2011

now, i have just updated to composer 2.1 and HC 300 with 2.1

but it still display Network joined and cannot id

ichbinbose · July 28, 2011

option one: make sure that the sr-250 is running zp, not embernet. If on embernet you will need to upgrade

option two: call tech support if your a dealer (or your local distributor, since it appears your not in the states)

option three: if your not a dealer, then call a local dealer.

Sign In

Remote SR-250 dis[lay Network Joined

Recommended Posts

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Archived

Important Information