ngthcongvnit Posted July 24, 2011 Share Posted July 24, 2011 Hi all,When I ID SR-250 on HC-300 , the LCD Display Network Joined. When i open logging :Jul 25 11:08:15 home-controller-300-000FFF11EDE5 ZAP: Current trust center policy decision id is: EZSP_ALLOW_JOINS_REJOINS_HAVE_LINK_KEYJul 25 11:08:15 home-controller-300-000FFF11EDE5 ZAP: Not changing trust center policyJul 25 11:08:17 home-controller-300-000FFF11EDE5 ZSVR: Inadequate information for Node 0x000fff0000412513 to be marked onlineJul 25 11:08:17 home-controller-300-000FFF11EDE5 ZSVR: Incoming message inserted new znode for LID: 0x000fff0000412513 SID: 0xfc04Jul 25 11:08:17 home-controller-300-000FFF11EDE5 ZSVR: Inadequate information for Node 0x000fff0000412513 to be marked onlineJul 25 11:08:17 home-controller-300-000FFF11EDE5 ZSVR: Znode: 0x000fff0000412513 needs to announce since we dont have its identify information.Jul 25 11:08:17 home-controller-300-000FFF11EDE5 ZSVR: Inadequate information for Node 0x000fff0000412513 to be marked onlineJul 25 11:08:17 home-controller-300-000FFF11EDE5 ZSVR: Inadequate information for Node 0x000fff0000412513 to be marked onlineJul 25 11:08:17 home-controller-300-000FFF11EDE5 ZAP: -----------------------------------------------Jul 25 11:08:17 home-controller-300-000FFF11EDE5 ZAP: Address Table Front Panel EntriesJul 25 11:08:17 home-controller-300-000FFF11EDE5 ZAP: FP IDX: 0x0000 LID: 0xffffffffffffffff SID: 0xffffJul 25 11:08:17 home-controller-300-000FFF11EDE5 ZAP: FP IDX: 0x0001 LID: 0x000fff0000412513 SID: 0xfc04Jul 25 11:08:17 home-controller-300-000FFF11EDE5 ZAP: FP IDX: 0x0002 LID: 0xffffffffffffffff SID: 0xffffJul 25 11:08:17 home-controller-300-000FFF11EDE5 ZAP: FP IDX: 0x0003 LID: 0xffffffffffffffff SID: 0xffffJul 25 11:08:17 home-controller-300-000FFF11EDE5 ZAP: FP IDX: 0x0004 LID: 0xffffffffffffffff SID: 0xffffJul 25 11:08:17 home-controller-300-000FFF11EDE5 ZAP: FP IDX: 0x0005 LID: 0xffffffffffffffff SID: 0xffffJul 25 11:08:17 home-controller-300-000FFF11EDE5 ZAP: FP IDX: 0x0006 LID: 0xffffffffffffffff SID: 0xffffJul 25 11:08:17 home-controller-300-000FFF11EDE5 ZAP: FP IDX: 0x0007 LID: 0xffffffffffffffff SID: 0xffffJul 25 11:08:17 home-controller-300-000FFF11EDE5 ZAP: -----------------------------------------------Jul 25 11:08:17 home-controller-300-000FFF11EDE5 ZSVR: Inadequate information for Node 0x000fff0000412513 to be marked onlineJul 25 11:08:21 home-controller-300-000FFF11EDE5 [1736]: Sending data to UI on driver Update Manager(100116) - data = <updateagent><status>device_status</status><deviceid>6</deviceid><version>1.8.2.66691</version><online>1</online><total>0</total><updated>0</updated><devicestate></devicestate><valueinfo></valueinfo></updateagent>Jul 25 11:08:23 home-controller-300-000FFF11EDE5 ZSVR: Znode: 0x000fff0000412513 needs to announce since we dont have its identify information.Jul 25 11:08:23 home-controller-300-000FFF11EDE5 ZSVR: Inadequate information for Node 0x000fff0000412513 to be marked onlineJul 25 11:08:28 home-controller-300-000FFF11EDE5 ZSVR: Inadequate information for Node 0x000fff0000412513 to be marked onlineJul 25 11:08:29 home-controller-300-000FFF11EDE5 ZSVR: Znode: 0x000fff0000412513 needs to announce since we dont have its identify information.Jul 25 11:08:29 home-controller-300-000FFF11EDE5 ZSVR: Inadequate information for Node 0x000fff0000412513 to be marked onlineJul 25 11:08:32 home-controller-300-000FFF11EDE5 [1736]: PulseJul 25 11:08:35 home-controller-300-000FFF11EDE5 ZSVR: Znode: 0x000fff0000412513 needs to announce since we dont have its identify information.Jul 25 11:08:35 home-controller-300-000FFF11EDE5 ZSVR: Inadequate information for Node 0x000fff0000412513 to be marked onlineJul 25 11:08:41 home-controller-300-000FFF11EDE5 ZSVR: Znode: 0x000fff0000412513 needs to announce since we dont have its identify information.Jul 25 11:08:41 home-controller-300-000FFF11EDE5 ZSVR: Inadequate information for Node 0x000fff0000412513 to be marked onlineJul 25 11:08:47 home-controller-300-000FFF11EDE5 ZSVR: Znode: 0x000fff0000412513 needs to announce since we dont have its identify information.Jul 25 11:08:47 home-controller-300-000FFF11EDE5 ZSVR: Inadequate information for Node 0x000fff0000412513 to be marked onlineJul 25 11:08:52 home-controller-300-000FFF11EDE5 [1736]: PulseJul 25 11:08:53 home-controller-300-000FFF11EDE5 ZSVR: Znode: 0x000fff0000412513 needs to announce since we dont have its identify information.Jul 25 11:08:53 home-controller-300-000FFF11EDE5 ZSVR: Inadequate information for Node 0x000fff0000412513 to be marked onlineJul 25 11:08:59 home-controller-300-000FFF11EDE5 ZSVR: Znode: 0x000fff0000412513 needs to announce since we dont have its identify information.Jul 25 11:08:59 home-controller-300-000FFF11EDE5 ZSVR: Inadequate information for Node 0x000fff0000412513 to be marked onlineJul 25 11:09:05 home-controller-300-000FFF11EDE5 ZSVR: Znode: 0x000fff0000412513 needs to announce since we dont have its identify information.Jul 25 11:09:05 home-controller-300-000FFF11EDE5 ZSVR: Inadequate information for Node 0x000fff0000412513 to be marked onlineJul 25 11:09:07 home-controller-300-000FFF11EDE5 ZSVR: Inadequate information for Node 0x000fff0000412513 to be marked onlineJul 25 11:09:11 home-controller-300-000FFF11EDE5 ZSVR: Znode: 0x000fff0000412513 needs to announce since we dont have its identify information.Jul 25 11:09:12 home-controller-300-000FFF11EDE5 [1736]: PulseJul 25 11:09:15 home-controller-300-000FFF11EDE5 ZAP: Trust Center has a node joining with LID: 0x000fff0000412513 SID: 0x08de Status: EMBER_STANDARD_SECURITY_UNSECURED_JOIN Join Decision: EMBER_SEND_KEY_IN_THE_CLEARJul 25 11:09:15 home-controller-300-000FFF11EDE5 ZAP: Current trust center policy decision id is: EZSP_ALLOW_JOINS_REJOINS_HAVE_LINK_KEYJul 25 11:09:15 home-controller-300-000FFF11EDE5 ZAP: Not changing trust center policyJul 25 11:09:17 home-controller-300-000FFF11EDE5 ZSVR: Correcting mis-matched sid. Was: 0xfc04 Now: 0x08de LID: 0x000fff0000412513Jul 25 11:09:17 home-controller-300-000FFF11EDE5 ZSVR: Inadequate information for Node 0x000fff0000412513 to be marked onlineJul 25 11:09:17 home-controller-300-000FFF11EDE5 ZSVR: Znode: 0x000fff0000412513 needs to announce since we dont have its identify information.Jul 25 11:09:17 home-controller-300-000FFF11EDE5 ZAP: Corrected sid mismatch for LID: 0x000fff0000412513 from SID: 0xfc04 to SID: 0x08deJul 25 11:09:17 home-controller-300-000FFF11EDE5 ZSVR: Inadequate information for Node 0x000fff0000412513 to be marked onlineJul 25 11:09:20 home-controller-300-000FFF11EDE5 last message repeated 3 timesJul 25 11:09:21 home-controller-300-000FFF11EDE5 [1736]: Sending data to UI on driver Update Manager(100116) - data = <updateagent><status>device_status</status><deviceid>6</deviceid><version>1.8.2.66691</version><online>1</online><total>0</total><updated>0</updated><devicestate></devicestate><valueinfo></valueinfo></updateagent>Jul 25 11:09:23 home-controller-300-000FFF11EDE5 ZSVR: Znode: 0x000fff0000412513 needs to announce since we dont have its identify information.Jul 25 11:09:23 home-controller-300-000FFF11EDE5 ZSVR: Inadequate information for Node 0x000fff0000412513 to be marked onlineJul 25 11:09:29 home-controller-300-000FFF11EDE5 ZSVR: Znode: 0x000fff0000412513 needs to announce since we dont have its identify information.Jul 25 11:09:29 home-controller-300-000FFF11EDE5 ZSVR: Inadequate information for Node 0x000fff0000412513 to be marked onlineJul 25 11:09:32 home-controller-300-000FFF11EDE5 [1736]: PulseJul 25 11:09:35 home-controller-300-000FFF11EDE5 ZSVR: Znode: 0x000fff0000412513 needs to announce since we dont have its identify information.Jul 25 11:09:35 home-controller-300-000FFF11EDE5 ZSVR: Inadequate information for Node 0x000fff0000412513 to be marked onlineJul 25 11:09:41 home-controller-300-000FFF11EDE5 ZSVR: Znode: 0x000fff0000412513 needs to announce since we dont have its identify information.Jul 25 11:09:41 home-controller-300-000FFF11EDE5 ZSVR: Inadequate information for Node 0x000fff0000412513 to be marked onlineJul 25 11:09:47 home-controller-300-000FFF11EDE5 ZSVR: Znode: 0x000fff0000412513 needs to announce since we dont have its identify information.Jul 25 11:09:47 home-controller-300-000FFF11EDE5 ZSVR: Inadequate information for Node 0x000fff0000412513 to be marked onlineJul 25 11:09:52 home-controller-300-000FFF11EDE5 [1736]: PulseJul 25 11:09:53 home-controller-300-000FFF11EDE5 ZSVR: Znode: 0x000fff0000412513 needs to announce since we dont have its identify information.Jul 25 11:09:53 home-controller-300-000FFF11EDE5 ZSVR: Inadequate information for Node 0x000fff0000412513 to be marked onlineJul 25 11:09:53 home-controller-300-000FFF11EDE5 [1736]: Flash: GetConfigFile: using config file /etc/c4firmware/.flash.modconfigJul 25 11:09:53 home-controller-300-000FFF11EDE5 [1736]: Flash: GetConfigFile: using config file /control4/firmware/.flash.configJul 25 11:09:53 home-controller-300-000FFF11EDE5 [1736]: Flash: ReadConfigFile: Read 35 lines.Jul 25 11:09:59 home-controller-300-000FFF11EDE5 ZSVR: Znode: 0x000fff0000412513 needs to announce since we dont have its identify information.Jul 25 11:09:59 home-controller-300-000FFF11EDE5 ZSVR: Inadequate information for Node 0x000fff0000412513 to be marked onlineJul 25 11:10:05 home-controller-300-000FFF11EDE5 ZSVR: Znode: 0x000fff0000412513 needs to announce since we dont have its identify information.Jul 25 11:10:05 home-controller-300-000FFF11EDE5 ZSVR: Inadequate information for Node 0x000fff0000412513 to be marked onlineJul 25 11:10:11 home-controller-300-000FFF11EDE5 ZSVR: Znode: 0x000fff0000412513 needs to announce since we dont have its identify information.Jul 25 11:10:11 home-controller-300-000FFF11EDE5 ZSVR: Inadequate information for Node 0x000fff0000412513 to be marked onlineJul 25 11:10:12 home-controller-300-000FFF11EDE5 [1736]: PulseJul 25 11:10:17 home-controller-300-000FFF11EDE5 ZSVR: Znode: 0x000fff0000412513 needs to announce since we dont have its identify information.Jul 25 11:10:17 home-controller-300-000FFF11EDE5 ZSVR: Inadequate information for Node 0x000fff0000412513 to be marked onlineJul 25 11:10:21 home-controller-300-000FFF11EDE5 [1736]: Sending data to UI on driver Update Manager(100116) - data = <updateagent><status>device_status</status><deviceid>6</deviceid><version>1.8.2.66691</version><online>1</online><total>0</total><updated>0</updated><devicestate></devicestate><valueinfo></valueinfo></updateagent>Jul 25 11:10:23 home-controller-300-000FFF11EDE5 ZSVR: Znode: 0x000fff0000412513 needs to announce since we dont have its identify information.Jul 25 11:10:23 home-controller-300-000FFF11EDE5 ZSVR: Inadequate information for Node 0x000fff0000412513 to be marked onlineJul 25 11:10:29 home-controller-300-000FFF11EDE5 ZSVR: Znode: 0x000fff0000412513 needs to announce since we dont have its identify information.Jul 25 11:10:29 home-controller-300-000FFF11EDE5 ZSVR: Inadequate information for Node 0x000fff0000412513 to be marked onlineJul 25 11:10:32 home-controller-300-000FFF11EDE5 [1736]: PulseJul 25 11:10:35 home-controller-300-000FFF11EDE5 ZSVR: Znode: 0x000fff0000412513 needs to announce since we dont have its identify information.Jul 25 11:10:35 home-controller-300-000FFF11EDE5 ZSVR: Inadequate information for Node 0x000fff0000412513 to be marked onlineJul 25 11:10:41 home-controller-300-000FFF11EDE5 ZSVR: Znode: 0x000fff0000412513 needs to announce since we dont have its identify information.Jul 25 11:10:41 home-controller-300-000FFF11EDE5 ZSVR: Inadequate information for Node 0x000fff0000412513 to be marked onlineJul 25 11:10:47 home-controller-300-000FFF11EDE5 ZSVR: Znode: 0x000fff0000412513 needs to announce since we dont have its identify information.Jul 25 11:10:47 home-controller-300-000FFF11EDE5 ZSVR: Inadequate information for Node 0x000fff0000412513 to be marked onlineJul 25 11:10:52 home-controller-300-000FFF11EDE5 [1736]: PulseJul 25 11:10:53 home-controller-300-000FFF11EDE5 ZSVR: Znode: 0x000fff0000412513 needs to announce since we dont have its identify information.Jul 25 11:10:53 home-controller-300-000FFF11EDE5 ZSVR: Inadequate information for Node 0x000fff0000412513 to be marked onlineJul 25 11:10:54 home-controller-300-000FFF11EDE5 ZSVR: Sending Normal MTORR from zap with LID: 0x000fff00001c3f16Jul 25 11:10:54 home-controller-300-000FFF11EDE5 ZAP: MTORR sent with status: EMBER_SUCCESSJul 25 11:10:59 home-controller-300-000FFF11EDE5 ZSVR: Znode: 0x000fff0000412513 needs to announce since we dont have its identify information.Jul 25 11:10:59 home-controller-300-000FFF11EDE5 ZAP: Incoming route for node: 0x000fff0000412513 of: neighborJul 25 11:10:59 home-controller-300-000FFF11EDE5 ZSVR: Inadequate information for Node 0x000fff0000412513 to be marked onlineJul 25 11:10:59 home-controller-300-000FFF11EDE5 ZSVR: Inadequate information for Node 0x000fff0000412513 to be marked onlineJul 25 11:11:05 home-controller-300-000FFF11EDE5 ZSVR: Znode: 0x000fff0000412513 needs to announce since we dont have its identify information.Jul 25 11:11:05 home-controller-300-000FFF11EDE5 ZSVR: Inadequate information for Node 0x000fff0000412513 to be marked onlineJul 25 11:11:11 home-controller-300-000FFF11EDE5 ZSVR: Znode: 0x000fff0000412513 needs to announce since we dont have its identify information.Jul 25 11:11:11 home-controller-300-000FFF11EDE5 ZSVR: Inadequate information for Node 0x000fff0000412513 to be marked onlineJul 25 11:11:12 home-controller-300-000FFF11EDE5 [1736]: Pulseplease help me to resolve the problemthanks Link to comment Share on other sites More sharing options...
ngthcongvnit Posted July 24, 2011 Author Share Posted July 24, 2011 please help methanks Link to comment Share on other sites More sharing options...
ichbinbose Posted July 24, 2011 Share Posted July 24, 2011 uhmmm, what is it your trying to do? i Link to comment Share on other sites More sharing options...
ngthcongvnit Posted July 24, 2011 Author Share Posted July 24, 2011 please help me resolve that problem ? thanks all Link to comment Share on other sites More sharing options...
ILoveC4 Posted July 24, 2011 Share Posted July 24, 2011 I haven't seen where you explained what the problem is? Is the remote not working properly? If so, what problems is it having? Link to comment Share on other sites More sharing options...
ngthcongvnit Posted July 25, 2011 Author Share Posted July 25, 2011 i cannot identify SR-250 . it displays Scanning and Network Joined !!!! cannot loading Room Project , cannot ID when i press 4 x4 time Link to comment Share on other sites More sharing options...
thecodeman Posted July 25, 2011 Share Posted July 25, 2011 i cannot identify SR-250 . it displays Scanning and Network Joined !!!! cannot loading Room Project , cannot ID when i press 4 x4 timeTime for a call to tech support. Link to comment Share on other sites More sharing options...
ngthcongvnit Posted July 25, 2011 Author Share Posted July 25, 2011 I try remove battery , hold the 4 and zero button the same time . Replace baterry , keep hold button 4 and zero 15s ,When the 4 buttion color light up and dim . I release button 4 and zero. After 10 mins , it still scanning and Network joined ! i cannot identify Link to comment Share on other sites More sharing options...
ngthcongvnit Posted July 25, 2011 Author Share Posted July 25, 2011 pic display error SR-250 cannot IDthanks Link to comment Share on other sites More sharing options...
ILoveC4 Posted July 25, 2011 Share Posted July 25, 2011 Try pressing room off, #, *, 1, 3, 4, 1, 3, #. After that, try identifying it. This is of course only if what thecodeman suggested isn't available. Link to comment Share on other sites More sharing options...
ngthcongvnit Posted July 25, 2011 Author Share Posted July 25, 2011 Hi ILOVEC4 , i Tried pressing room off, #, *, 1, 3, 4, 1, 3, #.After that, try identifying it. but it still cannot id , the LCD of SR-250 display Network Joined !!!! Link to comment Share on other sites More sharing options...
ILoveC4 Posted July 25, 2011 Share Posted July 25, 2011 Hi ILOVEC4 , i Tried pressing room off, #, *, 1, 3, 4, 1, 3, #.After that, try identifying it. but it still cannot id , the LCD of SR-250 display Network Joined !!!!Have you tried rebooting your controller? Have you tried shutting down zigbee server and restarting it?When you pressed that button sequence did it say "leaving network"? Link to comment Share on other sites More sharing options...
ichbinbose Posted July 25, 2011 Share Posted July 25, 2011 what OS is the controller on vs the sr250. did you buy it new or off of ebay? Link to comment Share on other sites More sharing options...
ngthcongvnit Posted July 26, 2011 Author Share Posted July 26, 2011 i use HC-300 . composer 1.8.2 Link to comment Share on other sites More sharing options...
ILoveC4 Posted July 26, 2011 Share Posted July 26, 2011 i use HC-300 . composer 1.8.2It well be easier for people to help you if you answer all their questions. Link to comment Share on other sites More sharing options...
ngthcongvnit Posted July 27, 2011 Author Share Posted July 27, 2011 i use HC-300 . composer 1.8.2 , SR250-Z-B Link to comment Share on other sites More sharing options...
thecodeman Posted July 27, 2011 Share Posted July 27, 2011 Do you know what version your HC300 is using and the remote? (the HC300 can be on a different version than the version of software you are using). Link to comment Share on other sites More sharing options...
ngthcongvnit Posted July 27, 2011 Author Share Posted July 27, 2011 now, i have just updated to composer 2.1 and HC 300 with 2.1 but it still display Network joined and cannot id Link to comment Share on other sites More sharing options...
ichbinbose Posted July 28, 2011 Share Posted July 28, 2011 option one: make sure that the sr-250 is running zp, not embernet. If on embernet you will need to upgradeoption two: call tech support if your a dealer (or your local distributor, since it appears your not in the states)option three: if your not a dealer, then call a local dealer. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.