jacdx Posted December 29, 2011 Share Posted December 29, 2011 Hey all,I've got my NX8-E integrated with C4 right now using a 587 (virtual keypad). The basics work fine, but I feel like I should be doing more... e.g. taking advantage of the security system's motion sensors for C4 events, or popping up an announcement if a certain zone shows activity. I don't see how to do this though, since C4 doesn't seem to have any concept of what the zones actually are (type, name, status, etc.). Is there a way to bring in zone information into C4 so that the zones can be programmed against? I have about 40 zones.-J Link to comment Share on other sites More sharing options...
jacdx Posted December 30, 2011 Author Share Posted December 30, 2011 Ok, figured some of this out. Part of the problem was bad wiring on a GE motion sensor. I'd still like to be able to import zone names from the NX-8 somehow... Link to comment Share on other sites More sharing options...
RyanE Posted December 30, 2011 Share Posted December 30, 2011 The protocol does not allow downloading the zone names, so the driver can't do it, either.Unfortunately, it's a manual only process.Fortunately, you should only need to do it once.RyanE Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.