Altronix NetWay4EWP Outdoor PoE+ Hardened Switch provides a 1Gb SFP port and four (4) PoE+ (30W) ports or up to two (2) Hi-PoE (60W) ports. Cameras/edge devices may be located up to 100m from the unit. Embedded LINQ Technology allows you to monitor, control, and report power and diagnostics from anywhere
Input
115VAC 60 Hz, 3A or 230VAC 50/60 Hz, 1.65A.
Power Output
4-ports PoE+ (30W) or up to two (2) Hi-PoE (60W) ports
IEEE 802.3at (30W) and IEEE 802.3af (15W) compliant.
120W total power.
Integral surge protection.
Fiber Port
One (1) Gigabit SFP port.
Ethernet
Connectivity: RJ45, auto-crossover.
Wire type: 4-pair Cat-5 or better structured cable.
Distance: up to 100m.
Speed: 10/100 Mbps, half/full duplex, auto negotiation.
Battery Backup
Built-in charger for sealed lead acid or gel type batteries.
Automatic switch over to stand-by battery when AC fails.
Indicators (LED)
Individual PoE On LEDs for each port.
Individual IP Link status, 10/100Base-T/active LEDs for each port.
ALOS LED indicates fiber connection for SFP port.
Heartbeat LED indicates proper operation of the unit.
Temperature
Operating:
60W: - 40° C to 75° C ( - 40° F to 167° F).
75W: - 40° C to 70° C ( - 40° F to 158° F).
100W: - 40° C to 55° C ( - 40° F to 131° F).
120W: - 40° C to 45° C ( - 40° F to 113° F).
Storage: - 40° C to 85° C ( - 40° F to 185° F).
Relative Humidity: 85% +/- 5%.
BTU/Hr. (approx.): 61 BTU/Hr.
Operating Altitude
- 304.8 to 2,000m.
LINQ Technology
Remote network management allows for camera/device reset and monitoring.
PoE port management via Dashboard IP management program.
Provides local and/or remote access to critical information via LAN/WAN.
Email and Windows Dashboard Alert notifications report real-time diagnostics.
Event log tracks history.