pwade

Right.  I’m in Canada, so really not much of a difference to what I pay here factoring in conversion, duty, shipping and taxes.  I will think about that one.  

How much for one of the 10” screens.

Hi

Thanks.  I actually did reach out to them this morning through their website, but have not heard back.  Appreciate it.  Will try dm here. 

Would like the dealer to be familiar with Shaw TV equipment.  

On 8/20/2019 at 5:46 PM, Matt Lowe said:

could simplify it and just a magnetic contact on the mower just glue one on. and when its home it will be triggered and when it leaves can open the gate at specified times. You will also need override on at least one side of the gate so you can get in and out.

So the contact would be part of C4 and it would only be active on the times I set?  Is that correct?  If so that would be a very good idea.  Thanks.

Looking for a remote dealer from the Vancouver Island/Vancouver area or at lease same time zone.

Ya, that does sound like a great idea.  I was trying to figure out a better way then I had as I have to build new gates for that side of the house (wife orders).  I will have to give it some thought as when its cutting in the back yard (where its dog house is) the gate can stay closed.  When it has to go to the front yard I send it out in the middle of the night so it does not get run over as it has to cross the driveway to cut each side of the driveway.  I will have to figure a trigger for when it goes to the front yard only.  Alexa can send the mower out and Alexa can be bound to C4 so maybe there is way to tie it all together.  Problem I have is if I have some sort of sensor to trigger the gate, it will be opening and closing all the time when the mover is in the back yard as it cuts right up to the gate itself.  Maybe a sensor that is attached to the mower that is activated at dark only.   Hmmmm.....

Hey, thats a great idea.  I have that exact issue.  I have a Husqvarna 430x and I had to raise the gate so that the mower could go under it but of course small animals can too.  Why don’t you have the mover live in the back yard so it does not have to go through the gate?  I have a front and back yard so mine leaves the fenced back yard (where it lives) and has to go to the boulevard in the middle of the night to cut it.  Let me know what you come up with.  Why have it hooked to the C4?

4 hours ago, sonic30101 said:

It will have to be identified in the system by a dealer

Can it be done with Composer?

I figured out the switch had failed.  I replaced it with another one I had.  The new switch will turn the lights on and off but the other 3 keypads do nothing now.  How do I pair the keypads to the switch.  The switch also just shows green light top and bottom.  It has all worked for 8years with no problem.  Not sure why now but stuff happens.

How do I figure out which one has failed?  There are 4 on that light zone.

They are switches.  On fluorescent 

I have a 3 bay garage that has three zones of lights.  Zone for bay 1&2, zone for work bench and zone for bay 3.  Bay 3 switches (4 of them) will not turn the lights off.  Lights on the switches will change color from top to bottom when pressed but the garage lights themselves stay on for that bay/zone.  All other zones work just fine?  Any help would be appreciated.

Question, if I have a EA-3 and I have numerous C4 switchs and dimmers throughout the house and i want to install a few more C4 switches to the house where I have regular light switches, can I do that myself with HE and program it? or do i need my dealer?  I don't mean about wiring it, just the set up and programming.