hometheaterguy
-
Posts
52 -
Joined
-
Last visited
-
Days Won
1
Content Type
Profiles
Forums
Blogs
Gallery
Downloads
Events
Posts posted by hometheaterguy
-
-
Installed this Amp and want to control ON/OFF via a C4 relay. The relay is configured correctly with 12V ON and 0V OFF. However the amp turns on when the 3.5mm jack is installed in a 0V state and will not respond to a ON/OFF relay command. Tried a standard 12V wall wart and it works correctly. Using the Trinnov Altitude32 trigger works correctly. Tried another C4 relay output same thing. Using multiple relay outputs that work correctly using the same wiring configuration. Anyone else come across the same issue?
-
I have done overflow C4 programming for a local dealer in addition to my own system. I have basic skills, setting up small systems, hardware revisions/additions, lighting, writing simple IR or serial drivers, troubleshooting. As the result of a very messy divorce, the dealership was shut down overnight with no notice. Subsequently, all vendor accounts were closed and all employees/mine C4 accounts were deactivated. I am also a small dealer/installer in the Chicago area, but after speaking with C4 I have no interest in a path to a dealership. Anyone looking for some help, please contact me.
-
Cannot control mute with new driver.
-
-
Thank you Andrew for your help. I discovered that a glitch occurred when deleting the driver from the project. When adding the driver I noted that the info of the driver details when loaded into the project were different from the actual driver details. The project referred to a test driver I quickly wrote to test the commands but somehow was retained in the project file. I was able to sync this driver with the correct driver through the project driver screen. Now all is correct.
-
You can go to connections and open the Reavon driver and see all the connections? What ver of Composer are you using? I am on 3.2.4.
-
Yes, I am using the Composer driver creation tool. The file is attached. Yes when I try to make a connection using the driver, other than the serial connection, no other connections programed into the driver show up. Also, when I go to edit the driver, the I/O bar is grayed out. When reviewing the driver in Notepad, all the data is there.
-
It has been awhile since I have written a driver. This is a serial driver for the Reavon UBR-X200. The coding goes well, however, after adding the I/O info and saving the driver the I/O info is not in the driver when I go to make connections. Is this a C4 issue ? The I/O info is HDMI IN, and HDMI A/V, HDMI AUDIO, Coaxial. Optical, XLR as outputs. Also, when I try to edit the driver the I/O block is grayed out. The earlier drivers I wrote went fine. Any info would be appreciated. Also, the mfr serial info is written in hex. I recall I converted hex to decimal in the past...does it matter?
-
On 8/14/2017 at 7:45 PM, annex⁴ said:
Due to some misinformation being spread on the internet and the dealer forums we want to reiterate this driver was developed in partnership with Oppo. This is the reason it is linked to from their website. It was built to an API provided by Oppo. There will be an update coming shortly and a release of the driver for the 205. Because the existing driver hasn't failed to function but has only required some feedback adjustments it has been delayed while some highly needed groundwork be put in place for future driver releases.
But again the driver works, has Serial and IP Control and not a single part of it's development was from any reverse engineering.
It has been 3 months since this post...Any update as to when will the UDP-205 driver will be available?
-
On 8/14/2017 at 7:45 PM, annex⁴ said:
Due to some misinformation being spread on the internet and the dealer forums we want to reiterate this driver was developed in partnership with Oppo. This is the reason it is linked to from their website. It was built to an API provided by Oppo. There will be an update coming shortly and a release of the driver for the 205. Because the existing driver hasn't failed to function but has only required some feedback adjustments it has been delayed while some highly needed groundwork be put in place for future driver releases.
But again the driver works, has Serial and IP Control and not a single part of it's development was from any reverse engineering.
Can you provide an update on the release of the UDP-205 driver?
-
Deluxe Audio/Video in Naperville for C4 and a pretty decent product line.
-
Will the new driver be a UDP-20x to be compatible with both the 203 and 205? If yes, will it be a simple update to the existing 203 driver?
-
On 4/19/2017 at 3:44 PM, annex⁴ said:
We are awaiting our UDP-205 there will then be a separate driver.
I would like to convert to a IP driver as soon as we install the 205. Will the 203 driver provide basic control?
-
Thanks. I will look forward to it.
-
The OppO UDP-205 has a scheduled release of Approx 4/28/17. Orders are now being taken. Will the 203 driver work on the 205 or will it require a new driver?
Trinnov Amplitude 16 Amp - C4 Relay Control
in Troubleshooting, Workarounds, & Bugs
Posted
The Negative of the 12V supply to COM; the Positive of the 12V supply twisted to the Positive of the 3.5mm mono jack; the negative of the jack to NO or NC, neither work. This is exactly how I wired all the other amp triggers in the system, always NC.