Jump to content
C4 Forums | Control4

hometheaterguy

c4Forums Member
 View Profile  See their activity

  • Posts

    52

  • Joined

  • Last visited

  • Days Won

    1

 Content Type 

Everything posted by hometheaterguy

  1. hometheaterguy
    The Negative of the 12V supply to COM; the Positive of the 12V supply twisted to the Positive of the 3.5mm mono jack; the negative of the jack to NO or NC, neither work. This is exactly how I wired all the other amp triggers in the system, always NC.
  2. hometheaterguy
    Installed this Amp and want to control ON/OFF via a C4 relay. The relay is configured correctly with 12V ON and 0V OFF. However the amp turns on when the 3.5mm jack is installed in a 0V state and will not respond to a ON/OFF relay command. Tried a standard 12V wall wart and it works correctly. Using the Trinnov Altitude32 trigger works correctly. Tried another C4 relay output same thing. Using multiple relay outputs that work correctly using the same wiring configuration. Anyone else come across the same issue?
  3. hometheaterguy
    I have done overflow C4 programming for a local dealer in addition to my own system. I have basic skills, setting up small systems, hardware revisions/additions, lighting, writing simple IR or serial drivers, troubleshooting. As the result of a very messy divorce, the dealership was shut down overnight with no notice. Subsequently, all vendor accounts were closed and all employees/mine C4 accounts were deactivated. I am also a small dealer/installer in the Chicago area, but after speaking with C4 I have no interest in a path to a dealership. Anyone looking for some help, please contact me.
  4. hometheaterguy
    Cannot control mute with new driver.
  5. hometheaterguy
    deleteed
  6. hometheaterguy
    Thank you Andrew for your help. I discovered that a glitch occurred when deleting the driver from the project. When adding the driver I noted that the info of the driver details when loaded into the project were different from the actual driver details. The project referred to a test driver I quickly wrote to test the commands but somehow was retained in the project file. I was able to sync this driver with the correct driver through the project driver screen. Now all is correct.
  7. hometheaterguy
    You can go to connections and open the Reavon driver and see all the connections? What ver of Composer are you using? I am on 3.2.4.
  8. hometheaterguy
    Yes, I am using the Composer driver creation tool. The file is attached. Yes when I try to make a connection using the driver, other than the serial connection, no other connections programed into the driver show up. Also, when I go to edit the driver, the I/O bar is grayed out. When reviewing the driver in Notepad, all the data is there. dvd_Reavon_UBR-X200.c4i
  9. hometheaterguy
    It has been awhile since I have written a driver. This is a serial driver for the Reavon UBR-X200. The coding goes well, however, after adding the I/O info and saving the driver the I/O info is not in the driver when I go to make connections. Is this a C4 issue ? The I/O info is HDMI IN, and HDMI A/V, HDMI AUDIO, Coaxial. Optical, XLR as outputs. Also, when I try to edit the driver the I/O block is grayed out. The earlier drivers I wrote went fine. Any info would be appreciated. Also, the mfr serial info is written in hex. I recall I converted hex to decimal in the past...does it matter?
  10. hometheaterguy
    It has been 3 months since this post...Any update as to when will the UDP-205 driver will be available?
  11. hometheaterguy
    Can you provide an update on the release of the UDP-205 driver?
  12. hometheaterguy
    Deluxe Audio/Video in Naperville for C4 and a pretty decent product line.
  13. hometheaterguy

    I wrote a serial driver for the 15750 switch. If the codes are the same I would share.

    1. Neter66

      Neter66

      Thanks, I just blew the thing up somehow, so it's being RMAed.  Will try again when the replacement is delivered.

       

      Thanks
      D.

       

  14. hometheaterguy
    Will the new driver be a UDP-20x to be compatible with both the 203 and 205? If yes, will it be a simple update to the existing 203 driver?
  15. hometheaterguy
    I would like to convert to a IP driver as soon as we install the 205. Will the 203 driver provide basic control?
  16. hometheaterguy
    Thanks. I will look forward to it.
  17. hometheaterguy
    The OppO UDP-205 has a scheduled release of Approx 4/28/17. Orders are now being taken. Will the 203 driver work on the 205 or will it require a new driver?
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.

  I accept