fredsoneya

Hello! I have a couple of dimmer locations where getting a neutral to it is going to be a huge pain, there isn’t any spare cores I can use etc. One idea I had was to put the dimmer in the ceiling behind the light fixture and then use a wireless keypad at the actual location, as that way I can run the neutral down as I won’t need a switched live. Crazy idea to use a dimmer as a “module” which is sat in the ceiling or okay?

I have 3x Episode Soundbars with the wireless sub in my apartment and the subs just keep pairing randomly to each soundbar. So I could turn the Tv or music on in the living room and the sun in the bedroom pairs. Any idea how to fix? Driving me insane!!!

Strangely yesterday this didn’t work however just now it did! So I’m back up and running… thank you

Clicked the update button in the home app (their new "architecture") and now my Apple TV has stopped being controlled by C4... in the App when you try and enable control it says "unable to complete Apple TV integration". Any help????

UK!

Any ideas? Calls are coming through internally fine but when i'm out and about or even on WiFi elsewhere, the alert comes through but nothing else happens - no video etc. On 0S 3.3.3 and iPhone latest app!

Happening in 2x of my zones but has all been working fine until now They're powered by triad amps and triad audio matrix Any clues? Video attached. IMG_0526.MOV

I managed to trace this back to a network issue where I was routing traffic via a VPN, excluding the remotes solved this

I’m really struggling to fix this…! My soundbars just randomly connect via Bluetooth to the wrong subs (ie in other rooms). As soon as I turn them off (un plug) the soundbar connects back to the right sub. I’ve tried resetting and repairing.

Any ideas? Fine on touchscreen and iPhone apps but not on Neeo remotes. Have restarted remotes and had navigators refreshed.

Hello, I purchased 3x Episode Soundbar & Subs for my apartment and all has been okay (even though lack of IP control and native driver, once made a driver it was okay). However… randomly a sub will pair with a Soundbar. So sat in the bedroom turn TV on and the bass is through the living room sub. if I unplug the living room sub from the power, it then moves to the correct sub. these were all factory paired and appear fine but seem to get “confused” now and then and pair with another device. I now find myself turning subs off at the mains to force the bar to pair to the right sub when I start watching TV…

Yep perfectly. Mounted on the Samsung name with the sticker and all good

Hero - thank you so much

Yep i'm going to try a different make maybe, as I have loads of C4 ones but all have the same problem. Never had this before so slightly worried!!

Video where it doesn’t work… IMG_1606.MOV

Video of it working… IMG_1604.MOV

I’ve made a video - so strange. When I hold it an inch or so away, everything works perfectly. when I place it on or near the sensor, anyway round, it just doesn’t work

Thanks I will try that shortly… I had a problem where I was holding it closer and it wasn’t working so a little worried the TV doesn’t like it if it’s too close or not directly in line. Seems very buzzard

Hi Everyone, My IR only works if it’s held approx 1 inch in front of the sensor on the TV and not when it’s mounted next to it - obviously this isn’t going to work, any ideas? Am I going mad?

Can anyone recommend an IR (I can't do IP due to limited cable runs) for QE55Q70AATXXH? I have been trying to find one but no luck... not sure what is similar. Thanks so much!

I was thinking of using a Single EA5 in my comms rack and sending Audio (Phono/RCA) over Cat6 to each soundbar - any downside on this vs a local controller in each room? For the Video Audio, I would use HDMI ARC in each room.

Crazy they don’t have a driver for it

How do you find the integration with C4? I really prefer native triad audio but if I can't pull the cables I want then this is by far the easiest and cheapest solution...

Wow just checked out the Episode bar... that is very interesting and the wireless sub solves a big challenge too. Pulling wires is just going to be so hard in this apartment. So is your thinking EA3 into the Episode Bar optical port for audio and HDMI into the optical port for TV? Wonder if the Episode Bar has a driver on C4 or does the volume just get controlled by the TV/EA... They just need to merge that bar with the triad one and bang!

I’ve gone from every time having the problem to now about 2-3 times a week. I think I’m going to try IR, I hadn’t even considered that!