Edison Shema
-
Posts
0 -
Joined
-
Last visited
Reputation Activity
-
Edison Shema reacted to pbir in Group Lights
Advanced Lighting Scenes are a way to do this, but they are limited to a predefined end state. There is a Control4 Dimmer Load Group driver, but I am working on a more elaborate Advanced Lighting Group driver which would be more flexible. No commitment on availability at this time, but it should be in the next few weeks. The driver will be listed on DriverCentral.
-
Edison Shema reacted to Crustyloafer in c4-sapd 240
It's a native driver built into Composer Pro. It's this one:
https://www.dropbox.com/s/774mjdszqsj7zfq/Screenshot 2019-02-18 08.12.13.png?dl=0
and you then need to use the separate dimmable or non-dimmable light load drivers and then bind them to the Load 1 and Load 2 bindings on the keypad dimmer driver.
-
Edison Shema reacted to Brownbatsbreath in 0-12v DC dimmers for landscape LED's ?
If your lights are 12v, you’ll need a transformer.
If you want to dim it, consult with the transformer manufacturer on the best type of dimmer to use and install the corresponding C4 dimmer.
Please note, 0-10v dimmers are made for sending a 0-10v dimming signal to drivers/ballasts that are made to accept that signal. They are NOT meant to supply voltage directly to your low voltage light fixtures.
-
Edison Shema reacted to MOBOTIX in Mobotix Drivers
Hi all. I was just notified that HouseLogix was acquired by SnapAV and therefore the MOBOTIX drivers were taken down from the HouseLogix Website.
Here are the drivers in case anyone needs them:
camera_mobotix_ptz_mod1.c4i
mobotix_intercom.c4z