Mr.barillas

Reboot the projector after a surge or malfunction. 

Sony Projector 220V Outlet Reboot remotely using OVRC and/control4

any suggestions? i don't see any watt-box 220v

ok thanks ill take a look. 

all the control in c4 is done. now is just find a way to switch

Hi hope all you guys are doing great. this may be a weird question.

i a m building a show room. in that theater room  i will have two processors.

1 x Antem AVM70

https://anthemav.com/products-archived/type=av-processor/model=avm-70/page=overview

1 x Storm ISP Elite MK3

https://www.stormaudio.com/produit/isp-elite-mk3/

total the speakers in that room will be a 7.2.2 Atmos System.

what i want to do is have both of them connected and switch to either processor when needed without having to disconnect any wires. i am using those processors just for the audio.

the video is going into a separate way.  we are using Control4 in that room for control.

is there any device out there we can use for that purpose?  like an xlr audio switcher.

i am doing something like that but my fan have 4 wires going to it. i guess is 3 speeds plus ground.

Hi, we used the  C4-4SF120 for regular fans, with existing fans simple wall controller. but now we have seen the scenario where the fan have a smart controller, ( we don't like to use the Bond or any other similar as an option). i have read here and other websites that fans with smart controllers can be rewired to use the fan controller by C4. one of the fan i have now. have around 4 or 3 wires going inside the motor. (maybe for 3 speeds)

so what wires should i use to control this kind of fans with the c4 fan controller?

attached is a photo of similar controllers.

any help would be appreciated.

the issue with the cloud based integration is the delay and if for any reason you lose internet connection. you lost control of the whole house lights. sad...

thanks guys. problem solved.

Understood. My question is. Is the homework controller capable of powering up any control4 keypads? The same way is powering the Lutron’s? And the control will be in the control4 side?


Sent from my iPhone using Tapatalk

Hi Guys. question.

we have a project where the whole house is in lutron homeworks 8 Series. (picture of the controller attached)  we have like 16 keypads and they want to keep the Lutron modules and controller.

we have to integrate the homeworks with control4, but the keypads have to be removed.

can we use the same processor to power a control4 wireless keypad? i don't know if control 4 have a keypad that may be compatible. 

or we can have the electricians run a power 120 line to every keypad location and we just use the regular 120 wireless keypads?

then at the end we do the integration in control4 using the standard drivers.

whats the best practice here?

The New Remotes Should Be all on Zigbee, so they don't rely on external agents.  Like congested Wifi or IP router problems.

too many issues with those NEO remotes, to be honest, most cases we  stick to the SR260

BUT NOW IS TIME TO MOVE ON.

Yes. But at least I now I know. 
thanks for your reply. 

3 minutes ago, dcovach said:

You should be able to request to get the training credentials transfered

That’s the ideal. But would be nice to be 100% sure. 

Hi, everyone.

i have a basic question.

if you do the 4 days training.

and them after that, next year later you apply for the dealership and you get approved.

do you have to do the 4 days training again?