blub Posted June 12, 2012 Share Posted June 12, 2012 HelloI do have a problem with lights having a mind on their own, at some point in the evening. During daylight all is fine.Lights that do get turned on or are already turned on, switch themselves off simultaneously some time after 21:30. Sometimes they stay on until 22:30 or longer but inevitably they switch themselves off. When I turn them on again, they then switch themselves off again - only very quickly (after about 20sec).It happens with dimmers and switches. System is currently 2.2.0, will try to get it upgraded to 2.2.1.The problem is quite new, it did not exist in February with no change in programming since. Anyone ever had a similiar issue an maybe an idea how to narrow it down? Link to comment Share on other sites More sharing options...
AceOfSpades Posted June 12, 2012 Share Posted June 12, 2012 Have you attempted to reboot the switch? Tap the Top button 15 times.If that fails, you may have to reset/identify the switch.http://www.control4.com/documentation/Composer_Pro_User_Guide/troubleshooting_dimmers,_switches_and_keypads.htm Link to comment Share on other sites More sharing options...
blub Posted June 12, 2012 Author Share Posted June 12, 2012 Mhh okas for the reboot, wouldn't it be easier just to cut the power for the house!? - like a "master reset" :-)I dont think reidentifying is necessary all switches show up in the project and are controllable, just a little "self insecure" :-) Link to comment Share on other sites More sharing options...
AceOfSpades Posted June 12, 2012 Share Posted June 12, 2012 I am not a fan of just killing the Power. The reboot normally works for me. However, I haven't faced an issue quite the same as yours. Link to comment Share on other sites More sharing options...
thegreatheed Posted June 12, 2012 Share Posted June 12, 2012 Make sure you never set any wake up scenes from any of the touchpanels or on-screen navigators. Link to comment Share on other sites More sharing options...
blub Posted June 12, 2012 Author Share Posted June 12, 2012 I do not have any scenes within the project - so I think this can be ruled out as the cause of my issue.thx Link to comment Share on other sites More sharing options...
blub Posted June 15, 2012 Author Share Posted June 15, 2012 OK,The problem was a bug within a light scene,, in my case it happened to be the `all lights off scene`.After deleting it the bug was gone. I re-created the scene and still all is fine.Rebooting the light switches did not help and after going through every line of my programming the light scene was not triggered by programming - it just looks to have been a weired bug. However I missed logging it via system tools. Link to comment Share on other sites More sharing options...
AceOfSpades Posted June 16, 2012 Share Posted June 16, 2012 I do not have any scenes within the project - so I think this can be ruled out as the cause of my issue.thxLeast it is working now. Link to comment Share on other sites More sharing options...
thegreatheed Posted June 18, 2012 Share Posted June 18, 2012 OK,The problem was a bug within a light scene,, in my case it happened to be the `all lights off scene`.After deleting it the bug was gone. I re-created the scene and still all is fine.Rebooting the light switches did not help and after going through every line of my programming the light scene was not triggered by programming - it just looks to have been a weired bug. However I missed logging it via system tools.This actually sounds like a rogue wake up scheduleThey are set from the TOUCHPANEL, not the project. You'd have to look in each touchpanel to check for wake up schedules. They DO NOT show up in programming.Deleting the lighting scene, and recreating it, would break it's association to the wake up scene. Link to comment Share on other sites More sharing options...
blub Posted June 18, 2012 Author Share Posted June 18, 2012 OK thank you for the information.I have never installed/programmed a wakeup schedule, therefore a rouge "never programmed" wakeup schedule is as weired as rouge light scenes !I will check that next time I am at the house (will be quite some time), I did the troubleshooting over VPN remotely - so no access to the MTS.Or can I use MyHome PC to check for the wakeup schedule, and where do I look?.regards Link to comment Share on other sites More sharing options...
thegreatheed Posted June 18, 2012 Share Posted June 18, 2012 You don't install/program a wakeup schedule. The customer just enables it from the touchscreen. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.