dgbrown Posted October 25, 2013 Share Posted October 25, 2013 Hoping someone can provide some insight. I have an announcement (see attached) tied to a motion sensor sensing motion on the front porch. It seems that after enabling this code with this specific wav file for roughly 24 hours - director reloads.I changed the announcement roughly 36 hours ago and have not seen any issues since.Are there any length limitations for an announcement that might cause something like this ?Edited:File would not attach - so here's a link: https://dl.dropboxusercontent.com/u/13199344/VincentPriceLaughFromThriller-resampled.wav Link to comment Share on other sites More sharing options...
msgreenf Posted October 25, 2013 Share Posted October 25, 2013 Note: The Control4 system allows up to 10 MB of files for the Announcement agent, and plays a maximum of 15 seconds per announcement.http://www.control4.com/documentation/Composer_HE_User_Guide/Programming_with_the_Announcement_Agent1.htm Link to comment Share on other sites More sharing options...
dgbrown Posted October 25, 2013 Author Share Posted October 25, 2013 Note: The Control4 system allows up to 10 MB of files for the Announcement agent, and plays a maximum of 15 seconds per announcement.http://www.control4.com/documentation/Composer_HE_User_Guide/Programming_with_the_Announcement_Agent1.htmThanks ! The file referenced in the link appears to be within those bounds. Any other takers ? Link to comment Share on other sites More sharing options...
Cyknight Posted October 25, 2013 Share Posted October 25, 2013 Could be the wav file is a loop. The announcement plays only 15 seconds, but doesn't stop the file as such but lets it play out. If it's looped....I can see if I can check the file later. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.