nawty Posted November 15, 2013 Share Posted November 15, 2013 How long will it take to put an 800 into a system that a 1000 came out of (bad) I have the entire program backed up..... Will I have to identify all remotes and keypads again..? 1 HC 8002 HC2001 I/O Extender3 keypads5 remotes1 C4 amp just a ballpark if anyone has done this recently... All hardware was at 2.5.1 Thanks much... Link to comment Share on other sites More sharing options...
neil12011 Posted November 15, 2013 Share Posted November 15, 2013 A few hours at least, the project will need to be migrated, zserver changed, and re-identify. Link to comment Share on other sites More sharing options...
avittech Posted November 16, 2013 Share Posted November 16, 2013 It may not be that bad. I assume one of the hc200 was your zigbee coordinator, after 2.5 you are able to migrate a zigbee mesh. It may migrate over to the hc800 without re identifying. Link to comment Share on other sites More sharing options...
nawty Posted November 17, 2013 Author Share Posted November 17, 2013 9:30 start, 11:30 finishFirmware updates to the remotes took the most time.(not horrible)Just re identified the keypads to make sure and such and went from 1 bar to 3 bars of zigbeeSpeed on the remotes and switching was amazing.All done and very happy customer Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.